Aastra 430 User Manual page 102

Personalizing your phone
Function
Call Forwarding
Call forwarding if busy
Call Forwarding on No Reply
Switch group x
Control output
Welcome announcement
Protection
Remote maintenance
MCID
Agent
User group
Home alone
Free configurable
CLIR
102
Description
With this function you forward incoming calls directly to a different destina-
tion. For further information refer to chapter
ing)", page 54.
With this function you forward incoming calls directly to a different destina-
tion if you are busy. For further information refer to chapter
calls (Call forwarding)", page 54.
With this function you forward incoming calls you receive on your phone to
another destination. For further information refer to chapter
Call on No Reply (CFNR)", page 55.
This function lets you route calls and functions via switch groups. Each
switch group has three switching positions. The default position is 1.
You can control external electric equipment or installations using control
outputs. For example you can use your phone to open and close electric
gates or to switch the lights on or off throughout a building.
Announcement service for incoming internal and external calls. If you do not
answer an external call after a set delay, the user who is calling will obtain an
announcement. After the announcement the caller will then hear the ring-
back tone again.
This function protects you against Call Waiting and Announcement. For fur-
ther information refer to chapter
page 94.
This function lets you set remote maintenance access to your phone on a
one-off basis of permanently.
This function lets you track and record a malicious call. For further informa-
tion refer to chapter "Tracking a malicious
The call routing of calls in the queue can be controlled using an agent.
In the user group incoming and internal calls are routed to a group of inter-
nal destinations according to a preconfigured call distribution.
If calls to a user group can only be answered by one user, the user in question
can activate Home Alone on the user group. Then if the user is already in a
call, all subsequent internal or external calls to the user group obtain a busy
tone.
You can use function commands to define a function to suit your personal
requirements. A function can consist of one or more function commands,
function codes, and the phone number. You can either carry out a function
directly or store it under a key. For further information refer to chapter
mulating functions", page 104.
This function lets you prevent your call number from being displayed to the
caller. For further information refer to chapter
ber from your called party's terminal
"Forwarding calls (Call forward-
"Activating protection against call
call", page 65.
"Suppressing your call num-
display", page 65.
eud-1290/1.2 – R3.0 – 04.2013
"Forwarding
"Forwarding a
types",
"For-
Aastra 610d