Control Panel - Supermicro SuperServer AS-3015A-I User Manual

Control Panel

USB3.2 Port
Feature Description
The main power switch is used to apply or remove power from the power supply to the
server. Turning off system power with this button removes the main power but maintains
Power Button
standby power. To perform many maintenance tasks, you must unplug the system before
servicing.
NIC (LAN1) LED Indicates network activity on LAN1 when flashing.
Drive Activity LED Indicates drive activity on the storage drive when flashing.
Information LED Alerts operator of several states. See table below for details.
USB Ports Two USB3.2 Gen 1 Type A ports
Status Description
An overheat condition has occurred.
Continuously on and red
(This may be caused by cable congestion.)
Blinking red (1 Hz) Fan failure, check for an inoperative fan.
Blinking red (0.25 Hz) Power failure, check for a non-operational power supply.
Solid blue UID has been activated locally to locate the server in a rackmount environment.
Blinking blue UID has been activated using the BMC to locate the server in a rack environment.
USB3.2 Port
Information LED
Figure 1-2. Control Panel
Control Panel Features
Information LED
10
Chapter 1: Introduction
Power Button
Drive Activity LED
NIC (LAN1) LED