Sync Port; Table 2-56: Sync-Related Functions; Table 2-57: Sync Port Cables - Advantech Automation1 iXC4e Hardware Manual

2.9. Sync Port

2.9. Sync Port
The Sync port is a bi-directional high speed proprietary interface that lets you transmit encoder signals
between drives. This is typically used for multi-axis PSO applications where one or two drives send their
encoder signals to a main drive that has the PSO logic and PSO output signal. The iXC4e/XC4e contains
two Sync ports, labeled A and B.
To avoid signal contention, all Sync ports default to the input state during reset and immediately after
power is applied to the drive.
Table 2-56: Sync-Related Functions
DriveEncoderOutputConfigureDivider(),
DriveEncoderOutputConfigureInput(),
DriveEncoderOutputOn(),
DriveEncoderOutputOff()
[A3200: ENCODER OUT command]
PsoDistanceConfigureInputs()
[A3200: PSOTRACK INPUT command]
PsoWindowConfigureInput()
[A3200: PSOWINDOW INPUT command]
The Sync port uses low-voltage differential signaling (LVDS) and standard USB 3.0 type A (cross over)
cables.
Table 2-57: Sync Port Cables
Part Number
CBL-SYNC-3
CBL-SYNC-5
CBL-SYNC-7
CBL-SYNC-10
88
Function
Desciption
Length 3 dm; Connectors: USB Type A to USB Type A
Length 5 dm; Connectors: USB Type A to USB Type A
Length 7 dm; Connectors: USB Type A to USB Type A
Length 10 dm; Connectors: USB Type A to USB Type A
iXC4e/XC4e Hardware Manual
Description
Configure each Sync port as an input or an output
Let the PSO to track the SYNC A or SYNC B port.
www.aerotech.com