Brake Power Supply Connector; Table 2-50: Brake Power Supply Connector Pinout; Table 2-51: Mating Connector Part Numbers For The Brake Power Supply Connector - Advantech Automation1 iXC4e Hardware Manual

2.6. Brake Power Supply Connector

2.6. Brake Power Supply Connector
This port is the power supply connection to the on-board brake control circuit. Refer to
more information about the brake output interface.
Table 2-50: Brake Power Supply Connector Pinout
Pin# Description
1 Brake Power Supply (+)
2 Brake Power Supply (-)
Table 2-51: Mating Connector Part Numbers for the Brake Power Supply Connector
Description
2-Pin Terminal Block
84
Aerotech
P/N Phoenix P/N
ECK02390 1827616
iXC4e/XC4e Hardware Manual
Section 2.3.6.
Connector
In/Out/Bi
Input
Input
Wire Size:
Tightening
AWG [mm
Torque (Nm)
0.22 - 0.25 0.14 - 1.5 [26-16]
www.aerotech.com
for
2
]