Position Synchronized Output Interface [-Eb1]; Table 3-17: Pso Specifications [-Eb1]; Table 3-18: Pso Interface Connector Pinout [-Eb1]; Table 3-19: Mating Connector Part Numbers For The Pso Interface Connector [-Eb1] - Advantech Automation1 iXC4e Hardware Manual

iXC4e/XC4e Hardware Manual

3.5. Position Synchronized Output Interface [-EB1]

The PSO output signal is available on the -EB1 option board in two signal formats: TTL and Isolated.
The PSO signal is also available on the AUX I/O connector. Refer to
Table 3-17: PSO Specifications [-EB1]
Specification
Output
Maximum PSO Output (Fire) Frequency
Output Latency
[Fire event to output change]
Table 3-18: PSO Interface Connector Pinout [-EB1]
Pin # Description
1 PSO Output+
2 PSO Output-
3 PSO Output (TTL)
4 Ground
Table 3-19: Mating Connector Part Numbers for the PSO Interface Connector [-EB1]
Type
4-Pin Terminal Block
www.aerotech.com
3.5. Position Synchronized Output Interface [-EB1]
TTL
Isolated
TTL
Isolated
TTL
Isolated
Aerotech P/N Third Party P/N
ECK02399 Phoenix 1768004
Section 2.5.2.
Value
5 V, 16 mA (max)
5-24 V, 250 mA
12.5 MHz
5 MHz
5 ns
150 ns
In/Out/Bi Connector
Output
Output
Output
N/A
Wire Size: mm
0.5- 0.14 [20-26]
2 [AWG]
103