Table of Contents
Advertisement
Warnings & Safety Precautions
WARNING!
•
Consult local regulations regarding fumes outlets. Do not connect the hood to a fume, ventilation
or hot air duct. Confirm that room ventilation is appropriate with the local authorities. Make sure
the maximum air extraction flow rate for the appliances in the room does not exceed 4 Pa. The
room must have adequate ventilation if an extractor hood is used simultaneously with appliances
that run on gas or other fuels. The air must not be discharged into a flue that is used for
exhausting fumes from appliances burning gas or other fuels. Regulations regarding air extraction
must be complied with.
•
Before connecting the hood: switch off the electricity supply and check that the supplied voltage
and frequency coincide with that indicated on the appliance nameplate.
•
The hood may stop working during an electrostatic discharge (e.g. Lightning). This involves no
risk of damage. Switch off the electricity supply to the hood and reconnect after one minute.
•
To avoid the risk of fire, clean the metal filter regularly and closely watch and regulate pans
containing hot oil.
•
Do not use the hood if it shows signs of damage or imperfection. Contact Customer Service &
Repair Centre.
•
Flambe cooking must not be carried out underneath this appliance.
•
When installing the appliance, make sure that the following distances between the top of cooker
or hob and the lowest part of the hood must be observed: Gas Hobs 750mm; Electric hobs
650mm.
•
The manufacturer declines all liability for personal or material damage as a result of misuse or
incorrect installation of this appliance.
•
Regarding the information pertaining to installation, please refer to the "Installation Instruction"
of the Manual.
WARNING!
There is a risk of electric shock and fire if cleaning is not carried out in accordance with the instructions.
P.5
Advertisement
Chapters
Table of Contents
