Table of Contents
Advertisement
Operation Instructions
When power is connected for the first time, all the lights will turn on for 1 second then go dark, buzzer
beeps once, On/Off Key
In standby state, tap On/Off Key
Gear Display will show "F0", Gesture Control Indicator and WiFi Indicator will light up constant. If the
product does not receive any command in 1 minute, it will automatically return to standby state.
Gesture Control
Note:
In standby state, tap and hold On/Off Key
Function (Gesture Control Function is set to activated by factory default)
Wave from left to right:
Wave 1 time: Turns on the product; product will operate at gear level F24 by default, LED Lamp will turn
on, Operating Indicator will spin.
Wave 2 times: Product shifts to gear level F18.
Wave 3 times: Product shifts to gear level F12.
Wave 4 times: Product shifts to gear level F6.
Wave 5 times: Product shifts to gear level F1.
Wave 6 times: Product enters standby state.
Wave 7 times: Product turns on and operates at gear level F24 again, and cycle renews again.
Wave from right to left:
Product directly returns to standby state, motor and LED Light turn off.
Self-Cleaning Function
•
In standby state, tap and hold LED Lamp Key
Self-Cleaning Indicator Light blinks, product enters 9-min countdown. For the first 8 minutes, the
electric heater will heat up to melt the grease; in the last 1 minute, the motor will run to dissipate
the melted grease, after which the product will return to standby state.
•
To turn off Self-Cleaning Function midway, tap and hold Lamp Key
WiFi Function
•
Connecting WiFi: In standby state, long-press Turbo Key
control keys blinks; when WiFi is successfully connected, WiFi Indicator Light
constant.
•
Disconnecting WiFi: When WiFi is connected, long-press Turbo Key
WiFi, all control keys blinks for 2 minutes, then goes dark.
•
For detailed instructions regarding WiFi connection and using the smartphone App, please refer to
"Controlling The Product With The APP" section.
will go dim, product enters standby state.
once, all touch keys will light up, RPM Display will show "0000",
for 5 seconds to activate or deactivate Gesture Control
for 3 seconds to activate Self-Cleaning Function,
for 5 seconds to connect WiFi, all
P.12
for 3 seconds.
lights up
for 5 seconds to disconnect
Advertisement
Chapters
Table of Contents
