Voice Operated Transmission (Vox); Vox Type; Vox Function Setup - Kenwood ProTalk NX-P1200AV User Manual

Hide thumbs Also See for ProTalk NX-P1200AV:
Table of Contents

Advertisement

VOICE OPERATED TRANSMISSION (VOX)

VOX (VOX/ Semi-VOX) operation allows you to transmit hands-free. This feature
can be enabled by your dealer. To operate VOX, you must use an optional
headset.

VOX Type

VOX: When the voice level to the microphone is higher than the reference level
(VOX Gain Level), the transceiver automatically starts transmission.
Semi-VOX: Transmission is started by pressing the PTT switch or the button
programmed as [Second PTT], and transmission continues while speaking, even
after the PTT switch or the button programmed as [Second PTT] is released.
The Semi-VOX function is effective in the following cases.
• Incorrect transmission due to noise.
• Voice at the start of transmission is interrupted.

VOX Function Setup

To activate VOX and set the VOX Gain level, perform the following steps:
Connect the headset to the transceiver.
1
• The VOX function does not activate when a headset is not connected to the
accessory terminal of the transceiver.
With the transceiver power OFF, press and hold the Side 1 button while turning
2
the transceiver power ON.
Continue to hold the Side 1 button until Beep A (1 beep) sounds.
3
• The LED lights yellow.
• When the Side 1 button is released, the transceiver will announce: Zone
number, Channel number, VOX Gain level.
Use the button below to set VOX function.
4
VOX function ON/ OFF
Press the Side 2 button to toggle VOX function ON or OFF for the current
zone-channel. When turned ON, Beep A (1 beep) sounds. When turned OFF,
Beep B (2 beeps) sounds.
• You can change this setting for each zone and channel (selecting a zone:
press and hold the Side 2, selecting a channel: rotate the Selector).
VOX Gain Level Adjustment
Press the Side 1 button to set the VOX Gain level, from 1 (least sensitive) to
10 (most sensitive).
VOX/ Semi-VOX Selection
Press and hold the Side 1 button to toggle VOX type to VOX or Semi-VOX.
When Semi-VOX is selected, Beep A (1 beep) sounds. When VOX is selected,
Beep B (2 beeps) sounds.
44

Advertisement

Table of Contents
loading

Table of Contents