Individual Reply - Kenwood ProTalk NX-P1200AV User Manual

Individual Reply

Allows you to make an Individual Call to the caller when receiving a Group Call.
Group Call receiving transceivers
Transceiver operation
Group Call
Transceiver A
NXDN ID: 00001
Group ID: 00100
Transceiver D
PF Button
NXDN ID: 00004
[Individual Reply]
Group ID: 00100
Press this button to enter the Individual Call mode while outputting the received
1
voice or within 10 seconds after receiving the Group Call.
• LED blinks light blue.
Press the PTT switch while the LED blinks light blue, you make the Individual
2
Call to the caller.
• If a new Group Call is received while the LED blinks light blue, Individual
Call mode will be cancelled.
Note:
◆ Set a different NXDN ID for each transceiver.
◆ Group Call can be sent with the following settings.
a Select Reserved Group for Selcall on PTT > Call Type (NXDN) and send with the
Reserved Group ID.
- Only on the channels in Zone 4 of NX-P1300NU, Reserved Group function
(making a Group Call with the Reserved Group ID) can be used by default
settings.
- For details, refer to "Reserved Group Setup (Digital)" {p. 20}.
b Select Group Call for Selcall on PTT > Call Type (NXDN) and send with the Group
ID of the Group ID List No.
- To use this method, the settings by your dealer are required.
◆ Set the Group ID to the same number on both Transmission and Reception sides.
◆ To use the Individual Reply function in Analog mode, the settings by your dealer are
required.
Transceiver B
NXDN ID: 00002
Group ID: 00100
Transceiver C
NXDN ID: 00003
Group ID: 00100
39
Transceiver that makes Individual Call
Transceiver A
PTT switch
Transceiver D
Transceiver B
Transceiver C