Belling BPC90BR Instruction Manual page 18

Icon
WARNING:
Type
WARNING
TROUBLE SHOOTING WARNING
WARNING:
RISK OF ELECTRIC SHOCK
RISK OF ELECTRIC SHOCK
SYMBOL ISO 7010 W021
WARNING:
SYMBOL ISO 7010 W021
CAUTION
Before booking a service call, read the trouble shooting guide below, for more
WARNING: WARNING: CAUTION
IMPORTANT / NOTE
information on guarantee and service conditions, please contract local dealer.
IMPORTANT / NOTE
Problem
WARNING: WARNING:
Lights on but motor
is not working
1. SAFETY INSTRUCTIONS
WARNING:
EN - 10
WARNING:
Light and motor
1.1 General Safety Warnings
not working
WARNING:
Lights not working
Insufficient
suction
WARNING:
Icon
WARNING:
Type
WARNING
The rangehood
WARNING
WARNING:
RISK OF ELECTRIC SHOCK
is tilted forward
RISK OF ELECTRIC SHOCK
SYMBOL ISO 7010 W021
WARNING:
SYMBOL ISO 7010 W021
CAUTION
WARNING: WARNING: Only service centers should carry out servicing. Otherwise warranty may be void.
CAUTION IMPORTANT / NOTE
IMPORTANT / NOTE
WARNING:
WARNING:
WARNING:
EN - 10
WARNING:
WARNING:
Type
Serious injury or death risk
EN - 2
EN - 2
Possible causes
Motor has failed
Possible PCB issue
EN - 4
Fan is obstructed
House fuses blown
Mains power cable is
loose or disconnected
EN - 4
Broken or faulty LED(s)
The distance between
the rangehood and the
cooktop is too far
EN - 4
Current speed is not
providing enough extraction
for what is being cooked
Ducting is obstructed or not
Type
vented to the outside atmosphere
Serious injury or death risk
Rangehood is not
secured correctly
EN - 2
EN - 2
EN - 4
EN - 4
EN - 4
Meaning
Meaning
Serious injury or death risk
Dangerous voltage risk
Dangerous voltage risk
Meaning
Meaning
Serious injury or death risk
Dangerous voltage risk
Dangerous voltage risk
18
What to do
Contact service agent
Contact service agent
Disconnect power and
clear obtrusions
Reset / replace fuses
Refit mains power cable to power
outlet. Switch power outlet on
Contact service center
Refit the rangehood to the
correct distance. A gap between
650-750mm is recommended
Increase speed as required
Check ducting is pulled tight
and there are minimal bends and
it is exiting the external roof
Recheck and secure
rangehood to timber stud or
noggin with suitable fixing