Chapter 3. Initialize Element Status With Range-E7H; Command Description; Table 3-1: Initialize Element Status With Range Command-E7H - Spectra Logic Spectra 2k Develop Manual
Library
Hide thumbs
Also See for Spectra 2k:
- User manual (94 pages) ,
- Replacement manual (28 pages) ,
- Supplementary manual (12 pages)
Table of Contents
Advertisement
3 Initialize Element Status With
Range—E7h
Command Description
INITIALIZE ELEMENT STATUS WITH RANGE is a vendor-specific command for Exabyte tape libraries.
It is included in the library's command set to support the library's emulation of Exabyte
libraries.
When the library receives this command, it performs as though it had received the
INITIALIZE ELEMENT STATUS (07H) command, ignoring any additional parameters supplied with
this command. See Chapter 2. Initialize Element Status—07h for more information on
the command.
Table 3-1: Initialize Element Status With Range Command—E7h
Bit
Byte
7
00
01
Logical Unit Number (0h)
02
(MSB)
03
04
05
06
(MSB)
07
08
09
NBL
Range, Element Address, Number of Elements These fields are ignored.
6
5
4
Operation code—E7h
Number of Elements
0
3
2
Reserved
Element Address
Reserved
Reserved
Reserved
14
1
0
Range
(LSB)
(LSB)
0
0
Advertisement
Table of Contents
Need help?
Do you have a question about the Spectra 2k and is the answer not in the manual?