ABB RELION 670 Series Commissioning Manual page 61

1MRK 505 339-UEN B
The setting parameters for the LON communication are set via the local HMI. Refer to the
technical manual for setting parameters specifications.
The path to LON settings in the local HMI is Main menu/Configuration/Communication/SLM
configuration/Rear optical LON port
If the LON communication from the IED stops, caused by setting of illegal communication
parameters (outside the setting range) or by another disturbance, it is possible to reset the
LON port of the IED.
Path in the local HMI under Main menu/Configuration/Communication/SLM configuration/
Rear optical LON port
These parameters can only be set with the LON Network Tool (LNT).
Table 12:
Parameter
DomainID
SubnetID*
NodeID*
*Can be viewed in the local HMI
Path in the local HMI under Main menu/Congifuration/Communication/SLM configuration/
Rear optical LON port
These parameters can only be set with the LON Network Tool (LNT).
Table 13:
Parameter
NeuronID*
Location
*Can be viewed in the local HMI
Path in the local HMI under Main menu/Configuration/Communication/SLM configuration/
Rear optical LON port
Table 14: ADE Non group settings (basic)
Name Values (Range)
Operation
TimerClass
Path in the local HMI under Main menu/Configuration/Communication/SLM configuration/
Rear optical LON port
Table 15:
Command
ServicePinMsg
Commissioning manual
Setting parameters for the LON communication
Range Default
0 0
0 - 255 0
Step: 1
0 - 127 0
Step: 1
LON node information parameters
Range Default
0 - 12 Not loaded
0 - 6 No value
Unit
Off -
On
Slow -
Normal
Fast
LON commands
Command description
Command with confirmation. Transfers the node address to the LON Network Tool.
Establishing connection and verifying the LON communication
Unit Parameter description
- Domain identification number
- Subnet identification number
- Node identification number
Unit Parameter description
- Neuron hardware identification number in
hexadecimal code
- Location of the node
Step Default
- Off
- Slow
Description
Operation
Timer class
Section 7
M11888-3 v4
M11643-1 v3
55