Advertisement
• Temperature and other settings may also be set using a special
knob that replaces touching the program timer sensor keys.
Setting the time of day (clock)
• Set the clock to the current time of day by pressing the settings
selection sensor key (A). Then, select the symbol (4).
• Use the (C) and (D) sensor key to set the exact time of day.
• Confi rm the setting by pressing the (A) sensor key again; if the (A)
key is not pressed, the setting is automatically confi rmed after a
few seconds.
Setting the timer functions
In addition to setting the temperature, the electronic program
timer can also be used to set the timer functions. Both settings are
indicated on the same display. Require display is set by pressing the
relevant sensor key (A) or (B).
The program timer can be used to program the oven operation
in three ways:
• Cooking time setting - immediate start of oven operation; after a
set period of time, the oven is turned off automatically.
• Cooking end time setting - the time at which oven operation is to
end is set.
• Delayed start setting - automatic start and end of oven operation
at a selected time.
Setting the cooking time
With this program mode, the duration of oven operation is set
(cooking time). Maximum setting allowed is 10 hours.
• Press the (A) sensor key to select the symbol (1). Use the (C) and
(D) sensor keys to set the duration / cooking time.
• Turn on the oven (set the selector knob and cooking temperature).
After the expiration of the set time, the oven will automatically stop
operating (end of cooking time). An intermittent beep will sound,
which can be stopped by pressing any key; if no key is pressed,
the beep stops after one minute.
• The symbol (1) and the sign (_:_ _) will fl ash. If you wish to
resume cooking, press the (A) sensor key and set a new duration
if necessary.
Setting the cooking end time
This mode allows you to set the time at which the oven should
stop operating. Maximum setting allowed is 10 hours relative to the
current time of day.
• Make sure the current time of day is set correctly.
• Use the (A) sensor key and select the symbol (2). The current time
of day is indicated on the display. Press the (C) and (D) sensor
keys to set the cooking end time.
• Turn on the oven (set the selector knob and cooking temperature).
9
Advertisement
