Advertisement
Setting the child lock
For safety reasons, the oven will automatically go off
after a certain period of time:
- after 10 hours, if the cooking temperature is above
120°C;
- after 24 hours, if the temperature set is lower than
120°C.
Setting the beep volume (loudness)
The alarm volume can be set when no timer function is activated
(only current time of day is displayed).
• Press the (D) sensor key and hold it approximately three seconds;
a volume indicator will appear, and the corresponding sample
sound will sound. "oooo" indicates maximum volume, and "o"
indicates minimum volume. Use the (D) sensor key to select
among the four loudness levels.
• Confi rm the selected volume level by pressing the (A) sensor key;
if the (A) sensor key is not pressed the setting will be confi rmed
and stored automatically after a few seconds.
Activation: Press the (A) sensor key to select the symbol (5). Use
the (B) and (C) sensor keys to activate the child lock; the display will
read "ON". Confi rm the setting by pressing the (A) sensor key.
Deactivation: Press the (C) or (D) sensor to deactivate the child
lock; "OFF" is displayed.
The setting must be confi rmed by pressing the (A) sensor key.
- If the timer is locked when no timer function is set (only the
current time of day is displayed), the oven will not operate and no
changes to any setting will be allowed.
- If the timer is locked after one of the timer functions has been
set, the oven will operate as usually; however, no changes to the
settings will be possible.
Display dimmer
One minute after the appliance is turned off, the display will be
dimmed.
Deleting the timer settings
- All timer settings can be deleted any time by pressing the (C)
and (D) sensor keys simultaneously and holding them for three
seconds. The set programs are automatically interrupted and the
timer switches to display of the current time of day.
- Any timer setting can also be deleted in the following way:
selecting it using the (A) sensor key, then press the (B) and (C)
sensor keys simultaneously. Another way to delete a setting is by
setting the timer value to "0.00".
11
Advertisement
