Advertisement
Door lock (only with
some models)
Replacing appliance
parts
36
check, if they close properly. If the door does not open or close
correctly, make sure whether the hinge notches are correctly
placed in their seat hinges.
Attention
Always make sure the hinge attachment clips are fi rmly seated in
their supports when installing the door. If this is not the case, the
main hinge that is operated by a strong spring may be released
fi gure 2
any time while installing or removing the door. Risk of physical
injury.
• Oven door is fi tted with a door lock that prevents it from being
open until the lock is released. Door lock is opened by a
slightly pressing your thumb to the right and simultaneously
pulling the door outwards.
• When the oven door is closed, the door lock automatically
returns to its initial position.
Note: If the door lock is supplied with the appliance, attach
it under the appliance control panel in compliance with the
instructions for installation, which are supplied with the lock.
The oven lamp base and socket are under voltage. There is
a risk of electric shock!
Before replacing the oven lighting bulb, disconnect the cooker
from the power mains by removing the fuses or tripping the main
network switch.
Oven bulb
(only with some models)
Oven bulb is considered a replacement ware part and is not
covered by the warranty. Replace the bulb with a new one with
the following specifi cations: socket E 14, 230 V, 25 W, 300°C.
• Unscrew the glass cover in the counterclockwise direction,
replace the bulb, and replace the cover.
Bulb lamps used in this appliance are special purpose lamps
selected for household appliances use only. The are not suitable
for household room illumination.
Advertisement
