Table of Contents
Advertisement
Residual heat indication
After the switch-off of the hob, the heating zone is still hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zone may be touched safely.
When the residual heat indicator light is on, don't touch the heating zone and don't put any heat
sensitive object on them. There are risks of burn and fire!
"SLIDER" zone: to set power and timer values
Select the cooking zone. The display corresponding to the selected zone will be highlighted.
While the zone is activated (for a few seconds), you can adjust the power, either by sliding your
finger on the slider, or by direct access.
To adjust the power of another cooking zone, wait until the previous zone is no longer activated
(the highlighted display becomes normal).
STARTING-UP AND APPLIANCE MANAGEMENT
Before using your new hob
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.
Starting-up
•
Start-up/ switch off the hob
Action
To start
To stop
"press"
Control panel
press the key [
press the key [
"slide"
]
]
21
Display
[ 0 ]
nothing or [ H ]
Advertisement
Table of Contents
