Starting-Up; Pan Detection; Residual Heat Indication - Kuppersbusch EKI8340 2 Series Instructions For Use And Installation

Starting-up


Start up / switch off the hob:
Action
To start
To stop

Start up / switch off a heating zone:
Action
Zone selection
Select the power level
To stop
If no action is made within 20 second the electronics returns in waiting position.

Pan detection

The pan detection ensures perfect safety. The induction doesn‟t work:
 If there is no pan on the heating zone or if this pan is not suitable to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a suitable pan is put on the heating zone.
 If the pan is removed from the heating zone. The operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back on the heating zone. The
cooking continues with the power level set before.
After use, make sure that the heating elements have been switched off: don‟t leave the pan
detection [ U ] active.

Residual heat indication

After the switching off of a heating zone or the complete stop of the hob, the heating zones are
still hot. This is indicated by displaying [ H ] symbol.
The symbol [ H ] disappears when the heating zones may be touched safely.
As long as the residual heat indicators are on, don‟t touch the heating zones and don‟t put any
heat sensitive object on them. There are risks of burn and fire.
Control panel
press key [ ]
press key [ ]
Control panel
Press on the "SLIDER"
across from the desired zone
Slide on the "SLIDER"
Slide to [ 0 ] on "SLIDER"
29
Display
[ 0 ]
nothing or [ H ]
Display
[ 0 ]
[ 1 ] to [ P ]
[ 0 ] or [ H ]