Summary of Contents for Kuppersbusch EKE 6141 0F Series
Page 1
BEDIENUNGSANWEISUNG mit Montageanweisungen Instructions for use and installation instructions Instructions d'utilisation et avis de montage Gebruiksaanwijzing en montagehandleiding Istruzioni di uso e di montaggio Instrucciones de uso y de montaje Instruções de uso e de montagem Ο∆ΗΓΙΕΣ ΧΡΗΣΗΣ ΚΑΙ ΣΥΝΑΡΜΟΛΟΓΗΣΗΣ EKE 6141.0F EKE 8141.0F 227094 P51...
Disposing of the packaging For your information... Please ensure the environmentally-friendly disposal of the pack- Please read this manual carefully before using your appliance. It aging that came with your appliance. Recycling the packaging contains important information on safety and on how to use and material saves on resources and cuts down on waste.
Safety instructions Connection and operation • Do not put aluminium foil or plastic onto the cooking zones. Safety instructions Keep everything which could melt, such as plastics, foil and in • The appliances are constructed in accordance with the rele- particular sugar and sugary foods away from hot cooking vant safety regulations.
Appliance descriptiog The decorative design may deviate from the illustrations. 7. ON/OFF key 8. Cooking zone selection key 1. Front left cooking zone 2. Back left cooking zone 9. Symbol for locating the position of a cooking zone on the glass ceramic hob 3.
Appliance descriptiog Operating the hob with the sensor keys Power setting display (11) The power setting display shows the power setting which has The ceramic glass hob is operated with touch control sensor been selected, or: keys. The sensor keys are operated as follows: lightly touch a H ......Residual heat symbol on the surface of the ceramic glass plate.
Operation Operating time limit How to cut power consumption Operation The hob has an automatic time limit function. The duration of The following are a few useful hints to help you cut your con- continuous use of each cooking zone depends on the cooking sumption of energy and use your new hob and the cookware effi- level selected (see chart), provided that the setting of a respec- ciently.
Operation Operating the keys The controls described here expect the pressing of a (selection) key to be followed by the pressing of a subsequent key. The next key will need to be pressed within 10 seconds, otherwise the selection will be deleted. The Plus/ Minus keys can be touched individually or be permanently pressed.
Operation Automatic switch-off (timer) The automatic switch-off device is used to automatically switch off any cook- ing zone after a stipulated period of time. Cooking times ranging from 1 minute to 99 minutes can be set. 1. Switch on the hob. Switch on one or more cooking zones and set the required power settings.
Operation Automatic boost function Parboiling takes place at power level 9 with the automatic boost function. After a certain time the power level will switch down automatically to a lower simmering setting (1 to 8). When using the automatic boost function only the simmering setting with which the food is to be cooked through needs to be selected since the elec- tronic unit switches down automatically.
Operation Childproof lock The childproof lock serves the purpose of preventing children from switching on the hob either accidentally or intentionally. The controls are blocked. Switching on the child-safety lock 1. Press the ON/OFF key in order to switch on the childproof lock. 2.
Cleaning and Care Specific soiling Cleaning and Care Heavy soiling and stains (limescaling and shiny, mother-of- pearl-type stains) can best be removed when the hob is still • Switch the hob off and let it cool down before you clean it. slightly warm.
What to do if trouble occurs The symbol will light up. What to do if trouble occurs Food which has boiled over, cookware or other items are causing the touch control sensor keys to be consistently operated. Remedy: clean the surface or remove the item. Interference with and repairs to the appliance by unqualified per- To delete the symbol switch the hob off and on.
Instructions for assembly Safety instructions for kitchen unit fitters Installation Instructions for assembly • Veneers, adhesives and plastic surfaces of surrounding furni- Important ture must be temperature resistant (>75°C). If the veneers and • Remove any transverse strips underneath the worktop at least surfaces are not sufficiently heat resistant they can become in the area of the worktop cut-out.
Page 14
Instructions for assembly Dimensions in mm Clips • Drive the clips into the worktop cut-out at the intervals indicated. It is not necessary to adjust the height due to the horizontal stop. • Important! The horizontal drive of the clips must be flush with the worktop (avoid the risk of fractures).
Instructions for assembly Electrical connection No mains cable present in the factory • To connect the appliance, unscrew the cover of the connection • The electrical connection must be carried out by a quali- socket on the underside of the appliance in order to be able to fied electrician who is authorised to carry out such work! access the terminal.
Need help?
Do you have a question about the EKE 6141 0F Series and is the answer not in the manual?
Questions and answers