Beok Controls TGR86WIFI-EP Quick Start Manual page 3

2. "Automatic discovery": Search for devices (Figure 3), and add widgets
as prompted on the phone page.
(WIFI connection)
When the thermostat is turned on, press and hold the
seconds, the thermostat display will show.
Now, the WIFI icon flashes (slow flashing), and the thermostat enters the
status of code matching.
Find the temperature control product (Bluetooth + WIFI model) in the
"small household appliances. In the specific network configuration mode,
click the configuration button on the page, select the WIFI that can
connect to the Internet in the working area of the device, and enter it.
WIFI password, click "Next", click according to the page prompt (Figure 2),
"Go to Connect", and follow the instructions to find the prompt content
(Figure 3), click "Prompt content" and return to the Tuya APP to enter the
network configuration process.
In that case, the APP for the network configuration process is show
(Figure 1), and the network configuration successfully display the
interface (Figure 2).
The device's name with successful network configuration can be modified
and the room's location can be selected.
button for 5
If the distribution network fails, the APP will display the page shown in
the figure below. You can choose to add or view the help again.
Note: if the connection fails, please confirm whether the temperature
control device has entered the code matching state.
4. Thermostat APP interface display