Do you have a question about the TOL47 Series and is the answer not in the manual?
Questions and answers
Сергей
January 21, 2025
Добрый день! Не могу понять как настроить термостат .
1 comments:
Mr. Anderson
February 4, 2025
To set up the Beok Controls TOL47 Series thermostat, follow these steps:
1. Installation: - Contact a professional to install the thermostat safely and according to the law.
2. Powering On: - Ensure the thermostat is connected to a power supply (AC100-240V, 50/60Hz).
3. Wi-Fi Connection: - Download the "Tuya Smart" app and register an account. - Turn on your mobile phone's Bluetooth and connect it to a 2.4GHz Wi-Fi network. - Activate the thermostat's Wi-Fi module by turning it on and holding the button for 5 seconds until the Wi-Fi icon flashes.
4. Programming Settings: - Long press the M key to enter programming mode. - Use the M key to switch options, and the up or down keys to adjust parameters. - Press the 6 key to save and exit.
5. Advanced Option Settings: - When the thermostat is powered off, press and hold the M key and the key for 5 seconds. - Use the M key to navigate options, and the up or down keys to adjust settings. - Press the key to exit advanced settings.
6. Temperature Settings: - The default temperature setting is 5-60°C. Adjust it as needed using the up or down keys.
7. Sensor Configuration: - The default temperature sensor is set to "IN" (internal). Use the up or down keys to select "ALL" (all sensors) or "OUT" (external sensor).
8. Limit Temperature Adjustment: - The default limit temperature value is 35°C. Adjust it using the up or down keys.
Make sure to refer to the manual for specific details and further adjustments.
Need help?
Do you have a question about the TOL47 Series and is the answer not in the manual?
Questions and answers
Добрый день! Не могу понять как настроить термостат .
To set up the Beok Controls TOL47 Series thermostat, follow these steps:
1. Installation:
- Contact a professional to install the thermostat safely and according to the law.
2. Powering On:
- Ensure the thermostat is connected to a power supply (AC100-240V, 50/60Hz).
3. Wi-Fi Connection:
- Download the "Tuya Smart" app and register an account.
- Turn on your mobile phone's Bluetooth and connect it to a 2.4GHz Wi-Fi network.
- Activate the thermostat's Wi-Fi module by turning it on and holding the button for 5 seconds until the Wi-Fi icon flashes.
4. Programming Settings:
- Long press the M key to enter programming mode.
- Use the M key to switch options, and the up or down keys to adjust parameters.
- Press the 6 key to save and exit.
5. Advanced Option Settings:
- When the thermostat is powered off, press and hold the M key and the key for 5 seconds.
- Use the M key to navigate options, and the up or down keys to adjust settings.
- Press the key to exit advanced settings.
6. Temperature Settings:
- The default temperature setting is 5-60°C. Adjust it as needed using the up or down keys.
7. Sensor Configuration:
- The default temperature sensor is set to "IN" (internal). Use the up or down keys to select "ALL" (all sensors) or "OUT" (external sensor).
8. Limit Temperature Adjustment:
- The default limit temperature value is 35°C. Adjust it using the up or down keys.
Make sure to refer to the manual for specific details and further adjustments.
This answer is automatically generated