Metal Panels Assembly (Gioia-2 Model) - Cadel Venus Plus Instructions For Installation, Use And Maintenance Manual

10.5

METAL PANELS ASSEMBLY (GIOIA-2 MODEL)

EN
Assembly must be carried out by an authorised technician.
For panels installation, proceed as follows:
Fig. 19 - Upper screws removal Fig. 20 - Backward screws removal
• Remove the top cover: unscrew the upper screws and the backward screws (see Fig. 19 page 15 and Fig.
20 page 15).
Fig. 21 - Profiles removal Fig. 22 - Side panel insertion
• Unhook the 2 stainless steel side profiles (see Fig. 21 page 15).
• Insert the side using the relevant slots (see Fig. 22 page 15).
15
VENUS PLUS - GIOIA-2