Safety Instructions - Silvercrest SHTD 2200 B2 Operating Instructions Manual

Safety instructions

RISK OF ELECTRIC SHOCK
Connect the hair dryer only to a correctly installed mains
►
power socket providing electrical energy at the level detailed
on the rating plate.
Under no circumstances may the hair dryer be submerged in
►
fluids, or fluids be permitted to enter the appliance housing.
Do not expose the appliance to humidity and do not use it
outdoors. Should liquids enter the housing, disconnect the
appliance from the power source immediately and arrange
for it to be repaired by a qualified technician.
Disconnect the hair dryer from the mains power socket if
►
defective operation is apparent and before cleaning it.
To disconnect it, pull only on the plug itself, not on the power
►
cable.
Do not wrap the power cable around the appliance and
►
protect the cable from being damaged.
Should the power cable of the appliance be damaged, to
►
avoid potential risks it must be replaced by the manufacturer,
his customer service or by a qualified technician.
Do not kink or crush the power cable and lay it in such a way
►
as to prevent people from stepping on or tripping over it.
Do not use extension cables.
►
Never touch the hair dryer, the power cable or the plug with
►
wet hands.
Disconnect the hair dryer from the power source immedi-
►
ately after use. The appliance is completely free of electrical
power only when you unplug it.
You are not permitted to open or repair the housing of
►
the hair dryer. Should you do so, appliance safety can no
longer be assured and the warranty will become void.
Arrange for the hair dryer to be serviced and repaired only
by qualified specialists.
■ 4 │ GB │ IE
SHTD 2200 B2