Safety Instructions - Silvercrest SHAC 2400 C2 Operating Instructions Manual

Safety instructions

RISK OF ELECTRIC SHOCK
Connect the hair dryer only to a correctly installed mains
►
power socket providing electrical energy at the level detailed
on the rating plate .
Under no circumstances may the hair dryer be submerged in
►
fluids, or fluids be permitted to enter the appliance housing .
Do not expose the appliance to humidity and do not use it
outdoors . Should liquids enter the housing, disconnect the
appliance from the power source immediately and arrange
for it to be repaired by a qualified technician .
Disconnect the hair dryer from the mains power socket if
►
defective operation is apparent and before cleaning it .
To disconnect it, pull only on the plug itself, not on the power
►
cable .
Do not wrap the power cable around the appliance and
►
protect the cable from being damaged .
Should the power cable of the appliance be damaged, to
►
avoid potential risks it must be replaced by the manufacturer,
his customer service or by a qualified technician .
Do not kink or crush the power cable and lay it in such a way
►
as to prevent people from stepping on or tripping over it .
Do not use extension cables .
►
Disconnect the hair dryer from the power source immediately
►
after use . The appliance is completely free of electrical power
only when you unplug it .
You are not permitted to open or repair the housing of the
►
hair dryer . Should you do so, appliance safety can no longer
be assured and the warranty will become void . Arrange for
the hair dryer to be serviced and repaired only by qualified
specialists .
■ 4 │ GB │ IE │ NI │ CY SHAC 2400 C2