Safety Symbols - Agilent Technologies 1200 Series User Manual

A A Appendix A Appendix A

Safety Symbols

Table 5 shows safety symbols used on the instrument and in the manuals.
Table 5
Symbol
A WARNING notice denotes a hazard. It calls attention to an operating procedure,
WA R N I N G
practice, or the like that, if not correctly performed or adhered to, could result in
personal injury or death.
Do not proceed beyond a WARNING notice until the indicated conditions are fully
understood and met.
A CAUTION notice denotes a hazard. It calls attention to an operating procedure,
C A U T I O N
practice, or the like that, if not correctly performed or adhered to, could result in
damage to the product or loss of important data.
Do not proceed beyond a CAUTION notice until the indicated conditions are fully
understood and met.
58 58

Safety Symbols

Description
The apparatus is marked with this symbol when the user should refer to the
!
instruction manual in order to prevent risk of harm to the operator and to
protect the apparatus against damage.
Indicates dangerous voltages.
Indicates a protected conductor terminal.
Eye damage may result from directly viewing the light produced by the Xenon
flash lamp used in this product. Always turn the xenon flash lamp off before
removing it.
1200 Series Nano Pump User Manual 1200 Series Nano Pump User Manual