Advanced Rth Settings; Pilot Rth - Parrot ANAFI USA GOV User Manual

Tap Copy to copy coordinates to clipboard – and reuse as custom RTH point.
Tap an option at the bottom of the screen to select
Reticle (default)
Drone
Dynamic
*Refer to the "Map-based flying
Tap Share from coordinates options to open the Skycontroller USA sharing options.
Tap X to exit coordinate options and return to the full screen map.

Advanced RTH settings

The custom RTH option relies on managing coordinates, described in the previous section.
Activate advanced RTH settings through the Safety Preferences of FreeFlight 6 USA (refer to
the "PREFERENCES /
There are two advanced RTH options: Pilot & Custom.
Important: By activating advanced RTH features, the drone might not be able to reach its
destination in case of low battery, if you select return to Pilot, or a Custom position. Parrot
will not be held responsible in the event that the drone lands in a different location.

Pilot RTH

When you select the Pilot advanced RTH option, ANAFI USA returns to the GPS position of
the Skycontroller USA at the exact moment an RTH button is activated, or to the last known
coordinates of the controller, in case it has lost GPS synchronization.
For this reason, we recommend ANAFI USA pilots remain in the same location, after they
33
Coordinates options
displays center of the map coordinates
displays drone coordinates (when online), or last known position
(when offline)
displays drone, POI or WP coordinates (autonomous or assisted flights
only*)
modes" section of this guide for more information.
Safety" section of this guide for more information).