Table of Contents
Advertisement
Recall Function
This is used to restore some functions
that have already been started after the
appliance has been switched off
unintentionally.
If the appliance is switched off unintentionally,
carry out the following procedure within 6
seconds:
1. Switch on the appliance.
• The
button starts to flash.
2. Press the pause button
restore the functions that were previously
active.
This function restores the cooking zones,
timer and rapid heating functions; no
other functions will be restored.
Residual heat
If the cooking zone is still hot after being
switched off, the
on the display. The symbol clears once the
temperature drops below 60°C.
Safety features
See General safety instructions.
Limiting the cooking duration
The appliance has an automatic device that
limits the duration of use.
If the cooking settings for a pan are not
changed, the maximum operation time for each
zone depends on the power level selected.
When the device for limiting the duration of use
is activated, pan heating is deactivated and
the
symbol appears on the display.
Power level
1
2
3
4
5
6 - 7 - 8 - 9
32 - USE
immediately to
symbol will be displayed
Maximum cooking dura-
tion in hours
6
6
5
5
4
1.5
Setting the power level of the appliance
• This function allows you to set the
maximum power limit for your
appliance.
• The induction hob is configured to
operate at 7.4 kW, but the power
can be limited so that it will work at
6.0 kW, 5.5 kW, 5.0 kW, 4.5 kW,
4.0 kW, 3.5 kW, 2.8 kW and 2.4
kW.
With the appliance switched off:
1. Press and hold the
seconds.
2. The
symbols appear on the cooking
zone displays.
3. Press the buttons of any two cooking zones
at the same time.
• The current power level
the timer setting area
4. Press the right of the scroll bar to decrease
the power and the left to increase it.
5. Press the
button to save the new setting;
the hob will emit a sound and switch off.
After a minute of inactivity, the hob
switches off automatically.
Error notifications
If the appliance malfunctions or operates
incorrectly, the associated error code appears
on the display.
The error codes always begin with the letter "E"
or "Er" followed by a series of digits (e.g. "Er47-
30").
Errors coded as:
• "E02"
• "E2"
• "Er21"
Indicate that the appliance or part of it is
overheating. If this occurs, you should switch off
the appliance immediately, remove all pans and
let it cool down.
If these errors persist or if other errors appear,
make a note of the code and contact Technical
button for at least 3
is shown in
91477A921/A
Advertisement
Table of Contents
