Safety Features; Cleaning And Maintenance; Cleaning The Glass Ceramic Hob - Smeg SI2641DUK Manual

Controls lock
This feature is designed to lock all the
hob controls.
It is always active when the hob is
switched on.
It locks all buttons apart from this one
and the ON/OFF
This is useful when cleaning the appliance and
to prevent functions being modified by mistake.
To activate the controls lock function, at least
one cooking zone has to be active:
1. Press the button for at least one
second.
2. The LED on the display lights up for 2
seconds to indicate that the function has
been activated.
To disable the Controls lock, press the
button for at least one second.
It is always lit when the hob is activated.

Safety features

See General safety instructions.
Limiting the cooking duration
The appliance has an automatic device that
limits the duration of use.
If the cooking settings for a pan are not
changed, the maximum operation time for each
zone depends on the power level selected.
Heating is switched off when the device for
limiting the duration of use is activated.
Power level
1 - 8
9
Booster (P)

CLEANING AND MAINTENANCE

Cleaning the glass ceramic hob

See General safety instructions.
Cleaning the surfaces
12 - CLEANING AND MAINTENANCE
button.
Maximum cooking time
10 hours
3 hours
10 minutes
Residual heat indicators
When the cooking zones are switched off, if
they have a temperature above a certain safety
threshold, the symbol will appear on the
display. When the temperature falls below this
threshold, the symbol disappears.
Protection from overheating
If the hob is used on full power for a long
period, the electronics will have trouble cooling
down if the room temperature is high.
When certain safety thresholds are reached, on
or more cooking zones are deactivated. At the
end, if the internal temperature is very high, the
appliance is switched off automatically.
Error warnings
In the event of a malfunction or abnormal
operation, the display shows a message
containing the code associated with the error.
Error codes always begin with the letter "F"
followed by a digit or letter (e.g. "Ft or F4").
Errors coded as:
• "Fc"
• "Ft"
• "FE"
Indicate an overheating of the appliance or part
of it, so the appliance must be switched off
immediately, all pans removed and allowed to
cool down.
If these errors persist or different ones are
displayed, the code should be noted and the
Technical Support should be contacted.
Residual heat indicators are not to be
considered as error codes.
To keep the surfaces in good condition, they
should be cleaned regularly after use. Let them
cool first.
Ordinary daily cleaning
Always and only use specific products that do
91477A679/A