Table of Contents
Advertisement
PE8800 & 12-PE8800 Series
Rim Exit Device for 16, 28, 63, & 66 Functions
Installation Instructions
Tools Needed
Before installation:
1. Install mullion, if used.
2. Fit and hang door.
3. Check the box's label for the size of the exit device.
4. For wood doors, use wood screws and prep accordingly.
The surface of the door where the exit device is to be applied must be flush. Clear away any
raised projections to allow exit device to rest on the flat surface of the door. If shim kit is
required, contact your distributor.
Note: Please refer to trim and other installation instructions provided in the box.
DOOR HANDS DETERMINED FROM OUTSIDE OF DOOR
1-800-727-5477 • www.sargentlock.com
Copyright © 2023, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without
the express written permission of SARGENT Manufacturing Company is prohibited. Patent pending and/or patent
www.assaabloydss.com/patents.
OR SECURED SIDE
Support Block (Provided)
Rail Cutting Guide (Provided)
3
A8296A 2/23
Advertisement
Table of Contents
