Advertisement
PED4600 & PED4600 A Series
Mortise Lock Type Exit Device
Installation Instructions
Tools Needed
PED4600 & PED4600 A Exploded View
THIS EXIT DEVICE IS HANDED
CHECK HAND OF DEVICE AGAINST APPLICATION
OUTSIDE
RIGHT HAND
REVERSE
BEVEL
INSIDE
Mortice
Chassis
Vertical reference
line (C Chassis)
L
Left hand reverse bevel illustrated
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2023, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
LEFT HAND
REVERSE
BEVEL
Arm
Support Block (Provided)
Rail Cutting Guide (Provided)
Push Rail Assembly
"Lock Down Key"
To operate: Depress pushrail; insert hex key,
and turn counter clockwise.
Attention:
Not available with Fire Rated PED4600 A
Exit Devices.
Cover
Mounting Plate
M52 Cylinder Lockdown
(Exploded View for Clarity)
3
End Cap
FM579 1/23
Advertisement
