Table of Contents
Advertisement
Video Monitoring
EVENT VIDEO SCREEN
To view the event video, the recorder should be checked to be enabled; the camera should be checked to be enabled and
connected to the recorder. Besides, the camera should be mapped with the device where the event occurred.
(This is not available in SAMS Pro Lite.)
To watch the event video
O
Event video using the integrated monitoring
1.
From the top menu, select [Monitoring] > [Integrated Monitoring]. Move to the alarm event tab in the bottom,
and double-click the event to play.
O
Event video using the video data search
1.
From the top menu bar, select [Video] > [Search Video Data]. Perform the search with appropriate search criteria
and double-click the event.
CONFIGURING THE EVENT VIDEO SEARCH
(This is not available in SAMS Pro Lite.)
1.
Playback screen. Number of screens automatically changes according to number of cameras connected to the reader.
2.
Button to start or stop playing recorded footage.
3.
You can use this button to adjust the play speed between x1 and x32.
4.
Use this button to view the video frame by frame.
5.
Use this button to move back to the beginning (10 seconds before the event) of the footage.
104_ video Monitoring
1
2
3
4
5
Advertisement
Table of Contents
