1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Digital Camera
  5. TL100
  6. User manual

Samsung TL100 User Manual

Samsung digital camera user manual
Hide thumbs Also See for TL100:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Samsung TL100

Summary of Contents for Samsung TL100

  • Page 2: Getting To Know Your Camera

    Please check that the camera is operating properly prior to when you intend to use it (e.g. for a trip or an important event) to avoid disappointment. Samsung takes no responsibility for any loss or damage that may result from camera malfunction.
  • Page 3 fi re, injury, electric shock or severe damage to you or your camera. internal inspection, maintenance and repairs should only be carried out by your dealer or Samsung Camera Service centre. Please do not use this product in close proximity to fl ammable or explosive gases, as this could increase the risk of explosion.

  • Page 4: Table Of Contents

    Caution CAUTION indicates a potentially hazardous situation which, if not avoided, may result in a minor or moderate injury. Leaking, overheating, or damaged battery could result in fi re or injury. - Use battery with the correct specifi cation for the camera. - Do not short circuit, heat or dispose of battery in fi...
  • Page 5 Contents Using the camera buttons to set the camera POWER button SHUTTER button Smart button Mode switch Zoom W/T Lever Info (DISP) / Up button Macro / Down button Focus lock Flash / Left button Self-timer / Right button MENU button OK button Functions How to Enable Functions Using the...
  • Page 6 Contents Display SAVE Settings Formatting a memory Initialisation Setting up the Date / Time / Date type Time Zone File name Imprinting the recording date Auto power off Auto Focus lamp Selecting Video out type Setting the USB Starting play mode PLAY Playing back a still image Playing back a movie clip...
  • Page 7 Before contacting a service centre Specifi cations Software Notes SOFTWARE System Requirements About the software Setting up the application software Starting PC mode Removing the removable disk Samsung Master Setting up the USB Driver for MAC Using the USB Driver for MAC...

  • Page 8: System Chart

    Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Parts and accessories illustrated below may differ from exact appearance.

  • Page 9: Identifi Cation Of Features

    Identifi cation of features Front & Top Zoom T Lever (Digital zoom) Zoom W Lever (Thumbnail) Shutter button Speaker Self-timer lamp / AF Lamp USB / AV / DC terminal Power button Smart button Flash Lens/ Lens cover Microphone...

  • Page 10: Back

    Identifi cation of features Back LCD monitor Camera status lamp MENU button Play mode button Mode switch Strap eyelet 5 function button Delete button...
  • Page 11 Identifi cation of features Bottom Battery chamber Battery chamber cover Memory card slot Tripod socket To open the battery chamber cover, slide it in the direction shown above. 5 Function button Information / Up button Flash / Left button Battery holder Macro / Down button OK / Play &...
  • Page 12 Identifi cation of features Self-timer lamp Icon Status Description - For the fi rst 8 seconds, the lamp blinks at 1 second intervals. Blinking - For the fi nal 2 seconds, the lamp blinks quickly at 0.25-second intervals. For the 2 seconds, the lamp blinks quickly at Blinking 0.25-second intervals.

  • Page 13: Connecting To A Power Source

    Movie Approx. 80 MIN 800x592 image size 20fps frame rate These fi gures are measured under Samsung’s standard conditions and shooting conditions and may vary depending on the user’s methods. Important information about battery usage. When camera is not in use, turn off the power.
  • Page 14 Connecting to a Power Source Important information about USB cable usage. Use a USB cable with the correct specifi cation. If the camera is connected to the PC through a USB hub : connect the camera directly to the PC. If the camera and other devices are connected to the PC at the same time : remove other device.

  • Page 15: Inserting The Memory Card

    Connecting to a Power Source Insert the battery as shown - If the camera does not turn on after you have inserted battery, please check whether the battery (+ / -). - When the battery chamber cover is opened, do not force the battery chamber cover, this may damage it.

  • Page 16: Instructions On How To Use The Memory Card

    Should this be the case, you will need to purchase a new memory card. Wear and tear on the memory card is not covered by the Samsung warranty. The memory card is an electronic precision device. Do not bend, drop or subject the memory card to any heavy impact.

  • Page 17: Recording

    Instructions on how to use the memory card The camera can use SD/SDHC Memory Cards and MMC (Multi Media Cards). Card pins Write protect switch Label [SD (Secure Digital) memory card] The SD/SDHC memory card has a write protect switch that prevents image fi...

  • Page 18: Lcd Monitor Indicator

    LCD monitor indicator The LCD monitor displays information about the shooting functions and selections. [Image & Full Status] Description Recording mode Optical / Digital Zoom bar / Digital Zoom rate Voice Memo Number of available shots remaining Remaining time Internal memory icon 15 Camera shake Warning Icons Page...

  • Page 19: How To Use The Menu

    How to use the menu 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. 2. Use the up or down buttons to navigate through the menus. 3. Use the left or right buttons to select a sub menu. Volume Functions Start Sound...

  • Page 20: Starting The Recording Mode

    Starting the recording mode Selecting modes Mode selection using the Mode switch You can use the Mode switch on the back of your camera to select the correct mode. [Program mode] How to use the Program mode ( Selecting the automatic mode will confi gure the camera with optimal settings.

  • Page 21: How To Use The Movie Clip Mode

    Starting the recording mode How to use the Movie clip mode ( A movie clip can be recorded for as long as the available recording time (maximum of 20 minutes) of the memory capacity allows. 1. Use the Mode switch to select Movie Clip mode.

  • Page 22: Pausing While Recording A Movie Clip

    Starting the recording mode Pausing while recording a movie clip (Successive Recording) This camera allows you to temporarily stop during unwanted scenes, while recording a movie clip. Using this function, you can record your favourite scenes into a movie clip without having to create multiple movie clips.

  • Page 23: Using The Camera Buttons To Set The Camera

    Things to Watch Out for When Taking Pictures Under certain conditions the auto focus system may not perform as expected. - When photographing a subject that has little contrast. - If the subject is highly refl ective or shiny. - If the subject is moving at high speed. - When there is strong refl...

  • Page 24: Shutter Button

    SHUTTER button Used for taking an image or recording voice in the RECORDING mode. In MOVIE CLIP mode Pressing the shutter button down fully starts the process for recording a movie clip. Press the shutter button once and the movie clip is recorded for as long as the available recording time in the memory allows.

  • Page 25: Zoom W/T Lever

    Zoom W/T Lever When the menu window is not displayed, this lever is used to control the optical or digital zoom. This camera has a 3X optical zoom and a 5X digital zoom function. Using both will offer a total zoom ratio of 15X. TELE Zoom Optical zoom TELE : Move the Zoom W/T lever to the right to see the subject closer.

  • Page 26: Info (Disp) / Up Button

    Zoom W/T Lever Images taken using the digital zoom may take a little longer for the camera to process. Allow time for this to take place. If the Zoom W/T lever is being pressed during the Movie shots, the voice will not be recorded. You may notice a decrease in image quality when using the digital zoom.

  • Page 27: Macro / Down Button

    Macro ( ) / Down button While the menu is showing, the Down button operates as a direction button. When the menu is not showing, you can use the MACRO ) / DOWN button to take macro pictures. The distance ranges are shown below. Press the Macro button until the desired macro mode indicator appears on the LCD monitor.

  • Page 28: Focus Lock

    Focus lock To focus on a subject not positioned in the centre of the picture, use the focus lock function. Using the Focus Lock 1. Ensure the subject is in the centre of the autofocus frame. 2. Press the SHUTTER button halfway. When the green auto focus frame lights up, it means the camera is focused on the subject.
  • Page 29 Flash ( ) / Left button If you press the shutter button after selecting the fl ash, the fi rst fl ash fi res to check the shooting condition (Flash range and Power ratio of fl ash). Do not move the camera until the second fl...
  • Page 30 Flash ( ) / Left button Available fl ash mode, by recording mode Mode Self-timer ( ) / Right button When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-timer ( ) button.
  • Page 31 Self-timer ( ) / Right button Motion Timer Motion Pressing the Shuter button after Blink (1 second interval) setting the Motion Timer Detecting the subject's movement Blink (0.25 second interval) Turn on and the image is taken No movement is detected after 2 seconds The Motion Timer fl...

  • Page 32: Menu Button

    MENU button - When you press the MENU button, a menu related to each camera mode will be displayed on the LCD monitor. Pressing it again will return the LCD to the initial display. - A menu option can be displayed when the following are selected : MOVIE CLIP and STILL IMAGE mode.

  • Page 33: How To Enable Functions Using The Menu Button

    Functions ( How to Enable Functions Using the MENU Button 1. Press the MENU button in an available mode. 2. Press the Up / Down button to select the [Functions] menu and press the Right/OK button. Functions White Balance Sound Display Face Detection Right/OK...

  • Page 34: White Balance

    Functions ( White balance The white balance control allows you to adjust the colours to appear more natural. Mode Icon The camera automatically selects the ap- Auto WB propriate white balance settings, depending on the prevailing lighting conditions. Daylight For taking images outside. For taking images under a cloudy and Cloudy overcast sky.

  • Page 35: Iso

    Functions ( You can select the ISO sensitivity when taking pictures.The speed or specifi c light-sensitivity of a camera is rated by ISO numbers. [Auto] : The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness. [ISO 80, 100, 200, 400, 800, 1600, 3200] : You can increase the shutter speed while the same amount of light is present, by increasing the ISO sensitivity.
  • Page 36 Functions ( This function can detect up to 10 persons. When the camera recognises many people at the same time, it will focus on the nearest person. The Digital zoom is not activated in this mode. When the camera detects a target face, the white colour focus frame will be displayed over the target face and the grey colour focus frame appears over the remaining faces.

  • Page 37: Image Size

    Functions ( Smile Shot The camera automatically takes a picture by detecting the face of the subject although you don’t press the shutter button. If you press the Shutter button, the picture is taken in the normal way. When taking a picture of smile shot, showing teethes or keeping the smiley face of your subject helps detecting the smile face of the subject.

  • Page 38: Quality / Frame Rate

    Functions ( Quality / Frame rate You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Mode STILL IMAGE mode Icon Super Sub menu Fine Normal Fine File jpeg...

  • Page 39: Metering

    Functions ( Metering If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [Multi] ( ) : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area.

  • Page 40: Frame Guide

    Functions ( Frame Guide Set [Frame Guide] mode when you want someone else to take a picture for you from the angle you choose. How to use the [Frame Guide] mode 1. Take a picture from the angle you choose. - A guide appears round the sides of the picture.

  • Page 41: Photo Style Selector

    Functions ( Photo Style Selector You can add various effects to the image without using image editing software. 1. Select the desired Photo style selector by pressing the Left/Right button and press the OK button. 2. Press the Shutter button to take an image. Style mode Icon Normal...

  • Page 42: Image Adjust

    Functions ( Image Adjust Contrast You can change the contrast of the image. 1. Select [Contrast] by pressing the Up/Down button. 2. Change the contrast by pressing the Left/Right button. 3. Press the Shutter button to take an image. When Negative in photo style is set, contrast is not available. Sharpness You can adjust the sharpness of the picture you are about to take.

  • Page 43: Dis

    Functions ( Digital Image Stabilization (DIS) This function helps minimize camera shake when capturing a still image. [Off] ( ) : Disables the DIS function when capturing a still image. [On] ( ) : Enables the DIS function when capturing a still image. Things to watch out for using the DIS function 1.

  • Page 44: Voice Memo

    Functions ( Voice Memo You can add your voice-over to a stored still image. (Max. 10 sec.) - If the voice memo indicator is displayed on the LCD monitor, the setting is completed. - Press the shutter button and take a picture.

  • Page 45: Recording The Movie Clip Without Voice

    Functions ( Pausing while recording a voice Using this function, you can record your favourite voice clips into a voice recording fi le without having to create multiple voice recording fi les. 1. Press the OK button to pause recording. 2.

  • Page 46: Sound Menu

    Sound menu In this mode, you can set up sound settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by * are default settings. Menus are subject to change without prior notice. Sound ( Volume You can select a volume of start up...

  • Page 47: Af Sound

    Sound ( AF sound If you set AF sound to on, AF sound will be activated when the Shutter button is pressed down half way so that you can be aware of the camera operation status. - [AF sound] sub menu : [Off], [On]* Self Portrait This occurs when it automatically detects the location of the subject’s face when taking a self-portrait.

  • Page 48: Start Up Image

    Display ( Start up image You can select the image that is fi rst displayed on the LCD monitor whenever the camera is turned on. - Sub menus : [Off]*, [Logo], [User Image] - Use a saved image for the start-up image with the [Start Image] in the [Resize] menu in the play mode.

  • Page 49: Settings

    Settings ( Formatting a memory This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. - Sub menus [Yes] : A window for confi...

  • Page 50: Setting Up The Date / Time / Date Type

    Settings ( Setting up the Date / Time / Date type You can change the date and time that will be displayed on the captured images and set up the date type. Setting [Time Zone] enables you to display the local date and time on the LCD monitor when travelling overseas.

  • Page 51: Imprinting The Recording Date

    Settings ( Imprinting the recording date There is an option to include DATE / TIME on still images. - Sub menus [Off]* : The DATE & TIME will not be imprinted on the image fi le. [Date] : Only the DATE will be imprinted on the image fi...

  • Page 52: Auto Focus Lamp

    Settings ( Auto Focus lamp You can turn on and off the Auto Focus lamp. - Sub menus [Off] : The AF lamp will not light up in low light conditions. [On]* : The AF lamp will light up in low light conditions.

  • Page 53: Setting The Usb

    Settings ( - NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico. - PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland, Thailand, Norway. - When using a TV as an external monitor, you will need to select the external or AV channel of the TV.

  • Page 54: Playing Back A Still Image

    Starting play mode Turn the camera on and select Play mode by pressing the play mode button ( ). The camera can now play back the images stored in the memory. If the memory card is inserted in the camera, all the camera functions apply only to the memory card.

  • Page 55: Movie Clip Capture Function

    Starting play mode Movie clip capture function You can capture still images from the movie clip. How to capture the movie clip 1. Press the OK button while playing the movie clip. Then press the Down button. 2. The paused movie clip is saved in a new file name.

  • Page 56: Playing Back A Voice Memo

    Starting play mode Playing back a voice memo 1. Select a still image that has the voice memo. 2. Press the OK button to play back the voice memo. - To pause the voice memo, while playing it back, press the OK button again.

  • Page 57: Using The Camera Buttons To Set The Camera

    Using the camera buttons to set the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Play mode button If you have turned on the camera by pressing the POWER button, you can press the Play mode button once to switch to Play mode and press it again to switch to Recording mode.
  • Page 58 Thumbnail ( ) / Enlargement ( Searching or Deleting Files 1. Turn the Thumbnail lever to the left on the Smart Album screen. 2. Each time you turn the Thumbnail lever to the left, fi les in the relevant category are displayed on the Smart Album screen.
  • Page 59 Thumbnail ( ) / Enlargement ( Image enlargement 1. Select the picture you want to enlarge and move the Digital Zoom lever to the right. Then the selected picture will be digitally enlarged. 2. Different parts of the image can be viewed by pressing the 5 function button.

  • Page 60: Info (Disp) / Up Button

    Info (DISP) / Up button When the menu is displayed on the LCD monitor, the UP button operates as a direction button. When the menu is not displayed on the LCD monitor, pressing the Info button will display image information on the LCD monitor. Info (DISP) button Info (DISP) button Play &...

  • Page 61: Left / Right / Down / Menu Button

    Left / Right / Down / MENU button LEFT / RIGHT / DOWN / MENU buttons activate the following. - LEFT button : While the menu is showing, the LEFT button operates as a direction button. While the menu is not showing, press the LEFT button to select the previous image.

  • Page 62: Setting Up The Play Back Function Using The Lcd Monitor

    Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows.
  • Page 63 Setting up the play back function using the LCD monitor This menu is available while the camera is connected to a PictBridge supporting printer (direct connection to the camera, sold separately) with a USB cable. Menu Tab Main Menu Sub Menu One Photo Images All Photos...

  • Page 64: Edit

    Edit ( Resize Change the resolution (size) of pictures taken. Select [Start image] to save an image to be the start-up image. 1. Press the play mode button and press the MENU button. 2. Click the Up/Down button from the Edit menu to select [Resize] ( menu tab and press the OK button.

  • Page 65: Rotating An Image

    Edit ( Rotating an image You can rotate the stored images by various degrees. 1. Press the play mode button and press the MENU button. 2. Click the Up/Down button from the Edit menu to select [Rotate] ( ) menu tab and press the OK button.

  • Page 66: Image Adjust

    Edit ( Custom colour You can change the R (Red), G (Green) and B (Blue) values of the image. - OK button : Select / setup the Custom Colour - Up / Down button : Selects R, G, B - Left / Right button : Change the values Image Adjust 1.
  • Page 67 Edit ( Brightness control You can change the brightness of the image. 1. Select ( ) by pressing the Left/Right button and press the OK button. Then a bar for selecting the brightness will be displayed. 2. Change the brightness by pressing the Left/Right button.

  • Page 68: View

    View ( You can view the thumbnails and easily categorize or search a large amount of content such as pictures and videos. 1. Press the MENU button in playback mode. 2. Press the Up/Down button to select the desired menu. 3.

  • Page 69: Selecting Images

    Starting the Multi Slide Show ( Selecting Images You can select image to view 1. Use the Up / Down buttons to select the [Images] menu and press the Right button. 2. Select a desired sub menu by pressing the Up / Down button. [All] : All images saved in the Memory are played back.

  • Page 70: Setting Play Interval

    Starting the Multi Slide Show ( Setting play interval Set the Multi Slide Show play interval. 1. Select the [Interval] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down buttons to select the desired interval.

  • Page 71: Protecting Images

    File Options ( Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Remember that this will permanently delete unprotected images. Important shots should be stored on a computer before deletion takes place. The startup image is stored in the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if you delete all files on the memory card.

  • Page 72: Dpof

    File Options ( DPOF DPOF(Digital Print Order Format) allows you to embed printing information on your memory card’s MISC folder. Select the pictures to be printed and how many prints to make. The DPOF indicator will display on the LCD monitor when an image that has DPOF information plays back.
  • Page 73 File Options ( Index Images (except for movie clips and voice file) are printed as index type. 1. Press the Up / Down button and select the [DPOF] menu tab. And then press the Right button. 2. Select the [Index] menu and press the Right button again.

  • Page 74: Copy To Card

    File Options ( Copy To Card This enables you to copy image files, movie clips and voice recording files to the memory card. 1. Select the [Copy To Card] menu tab by pressing the Up / Down button. And then press the Right button.

  • Page 75: Smart Mode Display

    Smart mode Smart mode Smart mode allows users to take a photo simply, without setting any of the more complex functions available. Even beginners can easily learn how to operate it. [Smart Auto mode] You can use the Smart button at the top of the camera to start Smart mode.

  • Page 76: Starting Smart Mode

    Smart mode display Description Recording mode Optical Zoom bar Number of available shots remaining Remaining time Memory card icon / Internal memory icon Battery Flash Self-timer Image Size Frame rate Date / Time 2009/01/01 01:00 PM Auto Focus Frame Starting Smart mode Selecting modes Icons Page...

  • Page 77: How To Use Smart Auto Mode

    Starting Smart mode How to use Smart Auto mode ( The camera automatically chooses the appropriate camera settings based on a detected type of scene. It will be helpful if you are not familiar with the camera settings for various scenes. 1.

  • Page 78: How To Use Smart Movie Clip Mode

    Starting Smart mode How to use Smart Movie Clip mode ( This mode allows users to record a movie clip simply, without setting any of the more complex functions available. 1. Use the Smart button to select Smart Movie Clip mode. 2.
  • Page 79 Setting up the Smart menu Menu items available in Smart mode are as shown below. The items indicated by are default settings. Main Menu Sub Menu 4000X 3264X Photo Size 3000 Movie Size 800X592 640X480 Frame Rate 30 FPS 20 FPS Flash Timer Volume...

  • Page 80: Smart Play Mode

    Smart Play mode display The LCD monitor displays information about the Smart mode setting of the current photo. Description Smart Play mode Voice Memo DPOF Protect Folder name & File name Memory card indicator Battery Aperture value Shutter speed Flash Image size 4000X3000 ~ 320X240 Recording date...

  • Page 81: Pictbridge

    PictBridge You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. Setting up the camera for connection to the printer 1.

  • Page 82: Pictbridge : Picture Selection

    PictBridge : Picture Selection You can select images you want to print. Setting the Number of Copies to Print 1. Press the Menu button and the PictBridge menu will display. 2. Use the Up / Down buttons to select the [Images] menu and press the Right button.

  • Page 83: Pictbridge : Reset

    PictBridge : Reset Initialises user-changed configurations. 1. Use the Up / Down buttons to select the [Reset] menu tab. And then press the Right button. 2. Use the Up / Down buttons to select the desired sub menu value, and then press the OK button.
  • Page 84 - Take a picture for testing the camera condition and prepare extra battery. - Samsung cannot be held responsible for camera malfunctions. If the digital camera is not used for a long period, the date and time may adopt the default settings by automatical battery discharged. In...

  • Page 85: Warning Indicator

    Important notes Tempered glass is used for the camera’s LCD monitor, but excessive shock may damage the glass. If there are any cracks in it, do not touch them, or you may injure yourself. Warning indicator There are several warnings that may appear on the LCD display. [Card Error] Memory card error Turn off the camera power and turn it on again...

  • Page 86: Before Contacting A Service Centre

    Before contacting a service centre Please check the following The camera doesn’t switch on There is low battery capacity Insert fresh batteries. (p.14) Battery is inserted incorrectly with the polarities reversed. Insert the battery according to the polarity marks (+, -). The camera power ceases while in use The battery is exhausted Insert fresh batteries.

  • Page 87: Flash

    Before contacting a service centre The flash does not fire Flash off mode has been selected Dis-engage flash off mode The camera mode can't use the flash Refer to the FLASH instruction (p.27) Incorrect date and time is displayed The date and time have been set incorrectly or the camera has adopted the default settings Reset the date and time correctly The camera buttons do not operate...

  • Page 88: Specifi Cations

    - Effective Pixel : Approx. 12.2 Mega-pixel - Total Pixel : Approx. 12.4 Mega-pixel Lens - Focal Length : SAMSUNG Lens f = 6.3 ~ 18.9mm (35mm film equivalent : 35 ~ 105mm) - F No. : F3.0(W) ~ F5.6(T) - Digital Zoom : ·Still Image mode :1.0X ~ 5.0X...

  • Page 89: Image Size

    Super Fine About 169 About 196 About 231 About 246 About 365 About 548 About 986 Fine Normal About 365 About 411 About 481 About 519 About 705 About 759 About 1232 These figures are measured under Samsung standard conditions and may vary depending on shooting conditions and camera settings. Effect...

  • Page 90: Software

    - Approx. 121.4g (without batteries and card) Operating Temperature - 0 ~ 40°C Operating Humidity - 5 ~ 85% Software - Samsung Master, Adobe Reader Specifications are subject to change without prior notice. All trademarks are the property of their respective owners. (720mAh)

  • Page 91: System Requirements

    - Using a Hand-made PC or a PC and OS that has not been guaranteed by the manufacturer is not covered by the Samsung warranty. - Before reading this manual, you should have a basic knowledge of computers and O/S (Operating Systems).

  • Page 92: About The Software

    XviD codec. If a movie clip recorded with this camera does not play well, install this codec. This software is only compatible with Windows. Samsung Master : This is the all-in-one multi media software solution. You can download, view, edit and save your digital images and movie clips with this software.

  • Page 93: Setting Up The Application Software

    Click the [Samsung Digital Camera Installer] menu in the Auto run frame. 2. Install DirectX, XviD, Samsung Master by selecting a button shown on the monitor. If a recent version of DirectX has been installed on your computer, DirectX may not be installed.
  • Page 94 Setting up the application software 3. To play back the movie clip recorded with this camera on the computer, install the XviD codec. The XviD codec is distributed according to the GNU General Public License and everyone can copy, distribute and change this codec.

  • Page 95: Starting Pc Mode

    Setting up the application software 5. After restarting the computer, connect the PC to the camera with the USB cable. 6. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognise the camera. If your OS is Windows XP/ Vista, an image viewer program will open.
  • Page 96 Starting PC mode Connecting the camera to a PC Disconnecting the camera and PC Refer to page 97 (Removing the removable disk). Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them.
  • Page 97 7. An image file is transferred from the camera to your PC. - By using [Samsung Master], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.

  • Page 98: Removing The Removable Disk

    Removing the removable disk Windows 2000/XP/Vista (The illustrations may differ from those shown depending on the Windows O/S.) 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is constantly on.

  • Page 99: Samsung Master

    Samsung Master You can download, view, edit and save your images and movies with this software. This software is only compatible with Windows. To start the program, click [Start Programs Samsung Master]. Downloading images 1. Connect the camera to your PC.
  • Page 100 Image display window : A selected image displays in this window. Preview window : You can preview the changed image. A still image edited with Samsung Master can’t be played back on the camera. Refer to the [Help] menu in Samsung Master for further information.
  • Page 101 Frame display window : You can insert multi media in this window. Some movie clips that were compressed with a codec that is not compatible with the Samsung Master can’t play back in the Samsung Master. Refer to the [Help] menu in Samsung Master for further information.

  • Page 102: Setting Up The Usb Driver For Mac

    Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 10.3. 3.

  • Page 103: Faq

    Please check the following if the USB connection malfunctions. Case 1 USB cable is not connected or it is not the supplied USB cable. Connect the supplied USB cable. Case 2 The camera is not recognised by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager.
  • Page 104 If the movie clip can’t be deleted, or the removable disk can’t be extracted or an error message displays during the file transfer. If you install only the Samsung Master, the problems mentioned above occasionally happen. - Close the Samsung Master program by clicking the Samsung Master icon on the Taskbar.

  • Page 105: Fcc Notice

    Trade Name : SAMSUNG ELECTRONICS AMERICA, INC. Model No. : SAMSUNG TL100 Responsible Party : SAMSUNG ELECTRONICS AMERICA, INC. Address : 105 Challenger Road Ridgefi eld Park NJ Telephone No. : 1-800-SAMSUNG(726-7864) This device complies with Part 15 of the FCC Rules. Operation...

Table of Contents