Southwing SH-241 User Manual

3. Enter the PIN number: 3. Find the most comfortable
To replace an ear bud: 1 second to reject the call.
0000. 1. Pull gently with your hand position by rotating the head-
Now the headset and your one side of the earbud out- set forward and backward.
mobile phone are paired and wards. (see figure 2)
2. Select a new ear bud and
ready for hands free commu-
nication through the Blue- adjust it carefully so it fits per- When not in use, you can carry
tooth connection. fectly over the speaker nozzle. your headset in one of the fol-
To save battery you can dis- lowing convenient ways:
connect the headset and 1. Attach it to your clothes
your phone by pressing the using the designed Clip in the
Multi-function button [2] The Ear hook can be used bottom part of the headset. To increase the volume du-
2. Attach it to your mobile
three times. To re-connect for firm hold and maximum ring a call, press Vol+ button
them press the Multi-func- comfort. To mount the Ear phone using the cord provi- [3]. To decrease the volume,
tion button [2] once. hook, carefully place the ded; connect one end to the press the Vol - button [4].
round head of the Ear hook headset charging port and The headset will remember
between the headset body use the cord to hold it to previous volume settings
You will need to follow the and the clip, and make sure your mobile. each time it is turned on.
steps below if you want to that it is adjusted firmly. (See
pair your headset with ano- figure 2) To wear it follow
ther mobile phone. these steps: You can configure the head-
1. Ensure the headset is off. 1. Rotate the Ear hook [8]
set to automatically answer
2. Put the headset in pairing
slightly forward. all incoming calls after 3 se-
mode by pressing and hol- 2. Gently place the Speaker To turn the headset on, press conds. To do so, while in the
ding the Multi-function but- [5] into your ear canal. and hold the Multi-function ON state press Vol - for 3 se-
ton [2] for about 5 seconds 3. Rotate the Ear hook [8] button [2] for about 3 se- conds until you hear a beep,
until the Indicator light [2] backwards and adjust it be- conds until a rising series of after which the command
flashes red and blue alterna- hind your ear. tones is heard and the Indi- will be confirmed with the
4. To use the headset in the
tely and a series of high cator light [2] flashes blue 6 message "auto answer on".
tones are heard. Use the PIN other ear, simply mount the times. To disable automatic answer
Code '0000´ (zero-zero-zero- Ear hook [8] on the other To turn the headset off, press repeat the above action and
zero) for pairing. side of the headset. and hold the Multi-function "auto answer off" will be
3. Complete the normal pai- button [2] for about 3 se- confirmed.
ring process by following conds until a series of tones Activation of automatic call
steps 1, 2 and 3 in the auto- is heard and the Indicator pick-up will deactivate whis-
pairing section. We recommend first to se- light flashes showing that the per mode, which can not be
lect the ear bud type and unit is turning off. activated again until automa-
size that best fits your ear tic call pick-up has been de-
(see "Selecting an ear bud"). activated.
To wear the headset without When the phone rings (the
using the Ear hook: ring tone can be heard in the
1. Remove the Ear hook by headset), briefly press the
The headset comes with dif- pulling it out gently and store Multi-function button [2] Dial the number as usual
ferent sized comfortable ear it in a safe place. once to accept the call. Alter- with your phone. If your he-
2. Gently place the Speaker
buds, try and select the one nately, press and hold the adset is on and the phone
that best fits your ear. [5] into your ear canal. Multi-function button [2] for has been correctly connec-
ted, your phone will transfer ton [2]. This number can be
the call to your headset. automatically saved from the To conserve battery life, your
last incoming call number headset features an auto-
(not compatible for hidden or sleep function. This function
unidentified call numbers). switches the headset off
To voice dial briefly press the To do so, press and hold after 12 hours of inaction.
Multi-function button [2] and both Multi-function button [2] Once your headset has ente-
wait for the feedback tone and Vol+ buttons for 1 se- red auto-sleep, it can be
from the phone. Then speak cond, until you hear a series switched on again normally.
the name of the person you of tones. To check your battery level,
wish to call. To call the stored favorite press the Multi-function but-
number, press and hold the ton [2] 4 times, and a series
Push4 TM Multi-function but- of beeps will indicate the talk
ton [2] for 1 second. time in hours (4 beeps indi-
cates 4 or more hours of talk
time).
When the battery is low the
headset will produce an au-
The headset informs you by To change the default ring dible warning tone sequence
voice of the calling number tone in the headset enter the every 30 seconds, please
Briefly press the Multi-func- on a digit by digit basis when ring tone menu by pressing charge it immediately as you
tion button [2] twice; the last whisper mode is activated. either Vol+ or Vol - buttons have only few minutes of talk
called number will be auto- To deactivate it, in the ON for 5 seconds. Next, use the time left.
matically dialed. state: Vol+ and Vol - to select the
1. Press and hold simultane- new ring tone and press the
ously Vol+ and Vol - buttons Multi-function button [2]
Press the Multi-function but- for 5 seconds. Turn the head- once to select it and go back
ton [2] briefly during a call set upwards a small angle to stand-by mode.
and the call will be ended. and hold it with your thumb
to make this action easier.
2. You will hear the "whisper
off" deactivation message.
During a call, you may wish All incoming calls from the
to transfer the call to your favorite number (if already
mobile. To do so press the stored) will still be announ-
Multi-function button [2] ced.
twice. To transfer the call To activate whisper mode re-
back to the headset repeat peat the same command.
the same command.
You will hear "whisper on"
activation message.
It is possible to save a favo-
rite number in the headset
and speed dial it with the
Push4 TM Multi-function but-
- Do not leave your headset lity to react to road condi-
connected to the charger for tions.
Problems Suggestions extended periods of time, as - Be aware that using a wire-
excessive charging will re- less headset while driving is
The Headset will not - The Headset battery may need charging. duce battery life. illegal in certain countries.
Therefore, you should check
turn on - Try recharging the Headset.
the local laws before using
Pairing is unsuccessful - Try moving the phone and Headset closer together -- Only use the product ac- the product while driving.
cording to the directions wi- - As this product contains
during pairing.
- Make sure that the mobile phone is in the correct thin this User Guide. Usage parts which may cause injury
of this product contrary to if consumed, keep it out of
Bluetooth mode.
- Some electrical devices such as microwave ovens these directions could cause reach of children.
injury. In addition, any usage - Use only the power supply
create a noisy electrical environment making it diffi-
cult for the Headset to communicate with the phone. of this product contrary to provided by SouthWing or by
this User Guide will void any AT&T in AT&T packaging la-
Try moving away from such devices and try again.
warranty. beled as compatible with the
Pairing has succeeded - Make sure that your phone is switched on and ready - Do not use the product in SH241 headset.
an environment where it may
but calls are not heard to connect to the Headset.
come in contact with liquid,
be exposed to high humidity
The Headset stops res- - Ensure that your Headset battery is charged.
ponding to button pres- - Try resetting your headset by charging it for a or extreme temperatures.
few seconds and then switching it on again. Do not place the product in a
ses
fire as it may explode cau-
Audible calling number - If the calling number is hidden, whisper mode sing injury or death.
- Do not use the product in
identification does not will not function.
work - Activation of automatic call pick up will deacti- areas where usage of radio
transmitters is prohibited
vates whisper mode.
- Certain mobile phones do not implement the (e.g. aircraft and hospitals) or
caller ID feature in the standard format; there- close to sensitive devices
fore the whisper mode feature cannot function that may be affected by a
with these phones. radio transmitter (e.g. pace- One year Limited warranty:
makers). what is covered: AT&T
- Do not attempt to service warrants to the original pur-
this product yourself. If the chaser of this wireless ac-
Your headset battery will product requires servicing, cessory that should this
have a long life provided you this must be performed by product or any part be pro-
Visit us online at: follow these guidelines: an approved service person. ved defective in materials or
www.southwing.com/att-SH241 - Do not charge your headset - If the product becomes workmanship, from the date
Call toll free in USA/Canada outdoors.
dirty, it should be cleaned of proof of purchase for a
1-877-71S-WING or 1-877- - Do not charge your headset with a soft cloth. Do not use period of one (1) year, then it
717-9464 or email us at: if the ambient temperature is any cleaning agents as these will be subject to the terms
customer.serviceusa@ above 104 degrees Fahren- may damage the plastics, of this one year limited wa-
southwing.com heit (40 degrees Celsius) or electronics or battery. rranty. Such defects will be
below 32 degrees Fahrenheit - Usage of this product while repaired, replaced or credit
(0 degrees Celsius). driving, may reduce your abi- issued at AT&T's option, wi-
Thank you for choosing a
SH241 Bluetooth ® headset
from AT&T, powered by
SouthWing. This user guide
provides all the information
you will need to use and care
for your product. All relevant
information regarding your
SouthWing product can be
found in the support section
of our website:
www.southwing.com/att-
SH241
For added convenience, your
headset has an auto-pairing
function so that when you
turn the headset on for the
first time, it is already in pai-
ring mode. The Indicator
light [2] will flash red and
blue alternatively and a se-
ries of high tones and a
You will need to charge the voice prompt saying the PIN
battery of your headset. To Code '0000´ (zero-zero-zero-
do so, follow these steps: zero) can be heard.
1. Plug the power supply Follow these steps to pair
into a power outlet. the headset with your mobile
2. Plug the connector of the phone:
1. Put the mobile phone into
power supply into the Char-
ging Socket [1]. The Indicator pairing mode (reference your
light [2] will turn red to indi- phone user manual). Ensure
cate the headset battery is that the mobile phone is no
charging. more than 3 feet (1meter)
3. Once the Indicator light
away from the headset.
[2] turns off, the headset is 2. Select the headset name
fully charged and can be remo- "SouthWing SH241" from
ved from the power supply. the list.
thout charge for parts or breach of this warranty. In no operate the equipment. receiver is connected.
labor directly related to the event shall AT&T be liable for This equipment has been - Consult the dealer or an ex-
defect. damage in excess of the pur- tested and found to comply perienced radio or television
Limitations and Exclusions: chase price. with the limits for a Class B technician for help.
This warranty does not apply digital device, pursuant to
to any cost incurred for re- Part 15 of the FCC Rules. FCC RF Radiation Exposure
moval or reinstallation, or to These limits are designed to Statement:
any product or part thereof provide reasonable protec- This equipment complies
which has suffered through tion against harmful interfe- with FCC radiation exposure
normal wear and tear, altera- rence in a residential limits set forth for an uncon-
tion, improper installation, This device complies with installation. This equipment trolled environment. End
physical abuse, misuse, ne- Part 15 of the FCC Rules. generates, uses, and can ra- users must follow the speci-
glect or accident. Nor does it Operation is subject to the diate radio frequency energy fic operating instructions for
cover defects caused by following two conditions: and, if not installed and used satisfying RF exposure com-
shipment to an AT&T service (1) This device may not in accordance with the ins- pliance. This transmitter
center, or repair or service of cause harmful interference. tructions, may cause harmful must not be co-located or
the product by anyone other (2) This device must accept interference to radio commu- operating in conjunction with
than an AT&T service center. any interference received, in- nications. However, there is any other antenna or trans-
Damage resulting from an cluding interference that may no guarantee that interfe- mitter.
act of God, including but not cause undesired operation. rence will not occur in a par-
limited to fire, flood, earth- ticular installation. If this This product emits radio fre-
quake and other natural di- For questions regarding your equipment does cause harm- quency energy, but the radia-
sasters will be excluded. product or this FCC declara- ful interference to radio or te- ted output power of this
This limited warranty is in tion, contact: levision reception, which can device is far below the FCC
lieu of all other warranties, be determined by turning the radio frequency exposure li-
express or implied either in SouthWing equipment off and on, the mits. Nevertheless, the de-
factor by operations of law, 2655 LeJeune Rd. user is encouraged to try to vice should be used in such
statutory or otherwise, inclu- Suite 810 correct the interference by a manner that the potential
ding, but not limited to any Coral Gables, FL. 33134 one or more of the following for human contact with the
implied warranty of merchan- FAX: + 1 305 442 1676 measures: antenna during normal ope-
tability or fitness for a parti- fcc_certifications@ - Reorient or relocate the re- ration is minimized.
cular use. AT&T does not southwing.com ceiving antenna.
authorize any other person to - Increase the separation bet-
assume any liability beyond To identify this product, refer ween the equipment and re-
the warranty herein descri- to the Part, Series, or Model ceiver.
bed. In no event, whether number found on the pro- - Connect the equipment into
based in contract or tort shall duct. an outlet on a circuit diffe-
AT&T and/or SouthWing be rent from that to which the
liable for incidental, conse- The FCC requires the user to
quential, indirect, special, or be notified that any changes
punitive damages of any kind or modifications made to this
resulting from the use of this device that are not expressly
product, including interrup- approved by the party res-
ted or incomplete phone ponsible for compliance may
calls, or arising out of any void the user's authority to
HOW TO? ACTION HEADSET RESPONSE
[2]