Table of Contents
Advertisement
Quick Links
USER GUIDE
® Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. U.S.A. and
licensed to SouthWing.
* The features marked with an asterisk will only work with Bluetooth phones which
support the Hands-free profile. Today, most Bluetooth phones support this profile.
Note:
Please read the "Safe Usage Guidelines" and "Limited Warranty" before using the
headset.
INTRODUCTION
Thank you for choosing a SH240 Bluetooth® headset from SouthWing. This user guide
provides all the information you will need to use and care for your product. All relevant
information regarding your SouthWing product can be found in the support section of
our website: www.southwing.com
1. CHARGING THE HEADSET
You will need to charge the battery of your headset. To do so, follow these steps:
1. Plug the power supply into a power outlet.
2. Plug the connector of the power supply into the USB Charging Socket [1]. The
Indicator Light [2] will turn red to indicate the headset battery is charging.
3. Once the Indicator Light [2] turns off, the headset is fully charged and can be
removed from the power supply.
Please Note:
· The headset will not function while charging.
· If the Indicator Light [2] remains off while charging, the battery is already fully charged and does not
require further charging.
· To maximize battery life, do not charge the headset for extended periods of time.
· Full battery capacity will be achieved after two or three full charge/discharge cycles.
· When your battery is empty, it takes up to three hours to completely charge your headset.
2. PAIRING THE HEADSET
Auto-pairing
For added convenience, your headset has an auto-pairing function so that when you turn
the headset on for the first time, it is already in pairing mode. The Indicator Light [2]
will flash red and blue alternatively and a series of high tones can be heard. Follow
these steps to pair the headset with your mobile phone:
1. Put the mobile phone into pairing mode (reference your phone user manual). Ensure
that the mobile phone is no more than 3 feet (1meter) away from the headset.
2. Select the headset name "SouthWing SH240" from the list
3. Enter the PIN number: 0000
Now the headset and your mobile phone are paired and ready for hands free
communication through the Bluetooth connection.
To save battery you can disconnect the headset and your phone by pressing the Multi-
function button [2] three times. To re-connect them press the Multi-function button [2]
once.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Southwing SH240
Summary of Contents for Southwing SH240
- Page 1 INTRODUCTION Thank you for choosing a SH240 Bluetooth® headset from SouthWing. This user guide provides all the information you will need to use and care for your product. All relevant information regarding your SouthWing product can be found in the support section of our website: www.southwing.com...
- Page 2 Normal pairing You will need to follow the steps below if you want to pair your headset with another mobile phone. 1. Ensure the headset is off. 2. Put the headset in pairing mode by pressing and holding the Multi-function button [2] for about 5 seconds until the Indicator Light [2] flashes red and blue alternatively and a series of high tones are heard.
- Page 3 Accepting/rejecting* a call When the phone rings (the ring tone can be heard in the headset), briefly press the Multi-function button [2] once to accept the call. Alternatively, press and hold the Multi-function button [2] for 1 second to reject the call. Changing the volume To increase the volume during a call, press Vol+ button [3].
- Page 4 • Try resetting your headset by charging it for a few seconds and then switching it on again. 6. ADDITIONAL INFORMATION Contacts Please contact SouthWing with the following details should you have any questions or suggested improvements. Email: customer.service@southwing.com Please note:...
- Page 5 · As this product contains parts which may cause injury if consumed, keep it out of reach of children. · Use only the power supply or accessories approved by SouthWing. Usage of a different power supply or charger or modification of either of these devices may damage the product or result in a risk of electrocution.
- Page 6 7. To the extent allowed by local law, SouthWing will not be liable for any incidental or consequential damages of any nature whatsoever, including but not limited to lost profits or commercial loss.
- Page 7 SouthWing 2655 LeJeune Rd. Suite 810 Coral Gables, FL. 33134 FAX :+ 1 305 442 1676 fcc_certifications@southwing.com To identify this product, refer to the Part, Series, or Model number found on the product. The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by the party responsible for compliance may void the user’s authority to operate the equipment.
Need help?
Do you have a question about the SH240 and is the answer not in the manual?
Questions and answers