Materials You Will Need; Tools You Will Need - GE GSD3301K00BB Installation Instructions Manual

PARTS SUPPLIED IN INSTALLATION
PACKAGE:
• Two 8-18 x 5/8" Phillips-head wood screws
• Junction box cover and #10 hex head screw
• Drain hose (78" long) and hose clamp
• Cord protector (Power Cord Models Only)
• Conversion leads (Power Cord Models Only)
• Literature, product samples and/or coupons

MATERIALS YOU WILL NEED:

• WX09X70910 or WX09X70911 power cord if
applicable to your installation
• UL-Listed wire nuts (3)
• Thread seal tape
• 90° elbow (¾" hose internal thread on one
end, opposite end sized to fit water supply)
• GPF65 Side-mount bracket kit for use with
granite countertops
FOR NEW INSTALLATIONS:
• Electrical cable
• Water line–3/8" minimum copper tubing
(including ferrule and compression nut)
• Strain relief for electrical connection
• Hand shut-off valve (recommended)
• Air gap for drain hose, if required
• Waste tee for house plumbing, if applicable
• GPF10S drain hose (10' long), if needed
• Screw-type hose clamps

TOOLS YOU WILL NEED:

• Safety glasses
• 1/4" and 5/16" nutdrivers
• Flashlight
• Gloves
• Adjustable wrench (6")
• Phillips-head screwdriver
• Measuring tape
• Level
• Carpenter's square
• Bucket to catch water when flushing water
line
• Tubing cutter
• 15/16" socket wrench
FOR NEW INSTALLATIONS:
• Hole saw set
• Drill and appropriate bits
2
Screw Kit
#8
Phillips-Head
Wood Screws
5/8" long
78" Drain Hose
Cord Protector
(Power Cord Models Only)
Hose Clamp
Electrical Cable
or WR09X70910
or WX09X70911
Power Cord
Thread
Seal Tape
Strain Relief
GPF65 Side-Mount
Bracket Kit
Air
Gap
Screw-Type
Hose Clamps
Safety Glasses 1/4" and 5/16" Nutdrivers
Adjustable
Wrench
Gloves
Measuring Tape
Bucket
#10
Hex Head
Junction Box Screw
1/2" long
Junction Box Cover
Conversion Leads
(Power Cord Models Only)
Hot Water Line–3/8"
3 Wire Nuts
Minimum Copper
Tubing
Valve
Optional 10'
Drain Hose
Waste Tee
GPF10S
Coupler for
optional drain
hose
Flashlight
Phillips-Head
Screwdriver
Drill and
Bits
Hole Saw Set
Level
Tubing
Cutter
15/16"
Socket Wrench
90° Elbow
Carpenter's
Square