Materials You Will Need; Tools You Will Need - GE GDF510PGRWW Installation Instructions Manual

Built-in dishwasher
Hide thumbs Also See for GDF510PGRWW:
Table of Contents

Advertisement

Available languages

Available languages

PARTS SUPPLIED IN INSTALLATION
PACKAGE:
• Two 8-18 x 5/8" Phillips-head wood screws
• Junction box cover and #10 hex head screw
• Drain hose (78" long) and hose clamp
• Cord protector (Power Cord Models Only)
• Conversion leads (Power Cord Models Only)
• Literature, product samples and/or coupons

MATERIALS YOU WILL NEED:

• WX09X70910 or WX09X70911 power cord
if applicable to your installation
• UL-Listed wire nuts (3)
• Thread seal tape
• Depending on model, 90° elbow (¾" hose
internal thread on one end, opposite end
sized to fit water supply) -OR- ferrule,
compression nut and 90° elbow (3/8" NPT
external thread)
• GPF65 Side-mount bracket kit for use with
granite countertops
FOR NEW INSTALLATIONS:
• Electrical cable
• Water line–3/8" minimum copper tubing
(including ferrule and compression nut)
• Strain relief for electrical connection
• Hand shut-off valve (recommended)
• Air gap for drain hose, if required
• Waste tee for house plumbing, if applicable
• GPF10S drain hose (10' long), if needed
• Screw-type hose clamps

TOOLS YOU WILL NEED:

• Safety glasses
• 1/4" and 5/16" nutdrivers
• Flashlight
• Gloves
• Adjustable wrench (6")
• Phillips-head screwdriver
• Measuring tape
• Level
• Carpenter's square
• Bucket to catch water when flushing water
line
• Tubing cutter
• 15/16" socket wrench
FOR NEW INSTALLATIONS:
• Hole saw set
• Drill and appropriate bits
2
Screw Kit
#8
Phillips-Head
Wood Screws
5/8" long
78" Drain Hose
Cord Protector
(Power Cord Models Only)
Hose Clamp
Electrical Cable
3 Wire Nuts
or WR09X70910
or WX09X70911
Power Cord
Thread
Seal Tape
Strain Relief
GPF65 Side-Mount
Waste Tee
Bracket Kit
Air
Gap
Screw-Type
Hose Clamps
Safety Glasses
1/4" and 5/16" Nutdrivers
Adjustable
Wrench
Gloves
Measuring Tape
Tubing
Cutter
Bucket
#10
Hex Head
Junction Box Screw
1/2" long
Junction Box Cover
Conversion Leads
(Power Cord Models Only)
Hot Water Line–3/8"
Minimum Copper
Tubing
90° Elbow or Ferrule
Valve
and Compression Nut
(depending on model)
Coupler for
optional drain
Optional 10'
Drain Hose
GPF10S
Flashlight
Phillips-Head
Screwdriver
Drill and
Bits
Level
15/16"
Socket Wrench
hose
Hole Saw Set
Carpenter's
Square

Advertisement

Table of Contents
loading

Table of Contents