Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Uniden App Cam 4K Dome
Summary of Contents for Uniden App Cam 4K Dome
- Page 1 App Cam 4K Dome Quick Start Guide...
-
Page 2: What's In The Box
What’s in the Box App Cam 4K Dome Weatherproof Lid 1m Ethernet Cable Mounting Template Quick Start Guide Screw Kit... -
Page 3: General Introduction
General Introduction Mount Metal Case Lens Infrared Lights Daylight Sensor Built-in Mic Weatherproof Lid Ethernet Port Reset Button * Press and hold for 10 seconds to restore the camera to factory settings Power Port (Optional) NOTE: NOTE:... -
Page 4: Camera Connection
Before using the camera, please connect the camera to App Cam 4K NVR. DC Power Reset Button eSATA AUDIO DC48V Network (LAN) HDMI Note: The camera should be powered with a Uniden App Cam 4K NVR (not included in the package). Please set up the camera via the NVR interface. -
Page 5: Mount The Camera
Mount the Camera Installation Tips • Do not face the camera towards any light sources. • Do not point the camera towards a glass window. Or, it may result in poor image quality because of the window glare by infrared LEDs, ambient lights or status lights. •... - Page 6 Installation Tips Step 1 Drill holes in accordance with the mounting hole template. NOTE: Use the drywall anchors included in the package if needed. Step 2 Install the mount base with the mounting screws included in the package. NOTE: Run the cable through the cable notch on the mount base.
- Page 7 Step 3 To get the best field of view, loosen the adjustment knob on security mount and turn the camera. Step 4 Stiffen the adjustment knob to lock the camera.
-
Page 8: Troubleshooting
If the Infrared LEDs of your camera stop working, please try the following solutions: • Enable infrared lights on Device Settings page via Uniden Solo App. • Check if the Day/Night mode is enabled and set up auto infrared lights at night on Live View page via Uniden Solo App. -
Page 9: Specifications
Specifications Model App Cam 4K Dome Image Sensor 1/2.49” CMOS Sensor Video Resolution up to 3840x2160 (8MP) 4K up to 25 fps Video Compression H.264/H.265 Video & Audio Viewing Angle Horizontal: 87° Vertical: 44° Night Vision Up to 30 Meters... -
Page 10: Warranty
The warrantor is Uniden Australia Pty Limited ABN 58 001 865 498 (“Uniden Aust”). Terms of Warranty: Uniden Aust warrants to the original retail purchaser only that the Uniden App Cam 4K Dome (“the Product”), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below. - Page 11 Product does not conform with this warranty, you should deliver the Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden. Please refer to the Uniden website for address details. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim.
- Page 12 THANK YOU FOR BUYING A UNIDEN PRODUCT © 2021 Uniden Australia Pty Limited V1.0...
Need help?
Do you have a question about the App Cam 4K Dome and is the answer not in the manual?
Questions and answers