Configuration Menus - Blaze PowerZone Connect 122D Installation Manual & User Manual

5.3 Configuration Menus

Opening a web browser that is network connected to
a PowerZone™ Connect amplifier initially displays the
PowerZone™ Control Web App Dashboard illustrated in
Diagram 5A. The Dashboard is the 'home' page from which all
other configuration options can be accessed.
The Dashboard displays the amplifier status, output zones and
the configuration menu tabs. It also enables immediate access
to zone volume control The functions available under each
configuration menu tab are described in the following sections.
Adjust zone volume
Adjust zone volume
Diagram 5A
Configuration Dashboard display
Configuration
5.3.1 Input Tab
The Input Tab provides the following configuration parameters
for each amplifier input channel:
• Input name
• Mono/Stereo selection
• Input sensitivity
• High-pass filter
• Gain trim
• Five band equalisation
The Input Tab also enables input signals to be mixed and routed
to specific amplifier zones. The mix function enables any
amplifier input, including stereo or split mono S/PDIF inputs,
to be grouped with any other input or inputs to create multiple
predefined mixes.
Note: The number of individual mixes possible is equal to the
number of amplifier analog inputs.
Note: Mix inputs are muted by default with their level adjustment
sliders set to zero.
Mix operations take place following high-pass filter, input
equalisation and mono/stereo selection.
Select mono or stereo
Note: When adjusting input gain, the input level display should
remain green. If it displays red, the input gain should be reduced.
Input name - type to edit
Select input sensitivity option
Adjust input gain
Open EQ window
Diagram 5B
Input Tab display
(two inputs only shown)
Select input type