Boarding Platform; Front Eyelets; 10) Mooring Cleats - Sea-doo GTXPRO 130 Series Operator's Manual

WARNING
Be aware of the iBR gate move-
ment when starting the engine,
shutting down the engine or using
the iBR lever. Automatic move-
ment of the gate may squeeze fin-
gers or toes of people taking a hold
on the back or your PWC.

8) Boarding Platform

A boarding platform covers the rear
deck area.
CAUTION The two LinQ at-
tachment points are used to carry
accessories and should always be
retracted when not in use.
Two indentations in the platform are
used as foot rests for the rear facing
spotter when towing a skier, wake-
boarder or tuber.
A ski pylon can be installed by remov-
ing the ski pylon hole cover in the mid-
dle of the platform. The ski pylon hole
cover is not the fuel cap.
CAUTION Always install ski
pylon hole cover when ski pylon is
not installed.
219001878-027_a
1. Boarding platform
2. Spotter foot rests
3. LinQ attachments
4. Ski pylon hole cover

9) Front Eyelets

Eyelets can be used for mooring, tow-
ing and as tie-down points when trailer-
ing your watercraft.
219001878-031_a
TYPICAL
1. Front eyelet

10) Mooring Cleats

These cleats can be used for tempo-
rary docking such as when refueling.
The rear cleat can be used to tow an
inflatable tube.
219001878-028_a
TYPICAL
1. Mooring cleats
_______________
EQUIPMENT
52