Table of Contents
Advertisement
Operation
Using the appliance
Malfunction can occur due to
dirty and/or covered sensor buttons.
The sensor buttons do not react or
unintentional switching procedures
result, perhaps even the automatic
deactivation of the drawer.
Keep the sensor buttons and indica-
tors clean.
Do not place anything over the sen-
sor buttons or indicators.
Damage caused by liquids.
Liquids that get inside the drawer
can cause a short circuit.
Open and close a loaded drawer
carefully to prevent liquids from
spilling.
20
Open the drawer.
Touch the sensor control to switch
the drawer on.
Touch the Menu sensor control re-
peatedly until the required operating
mode lights up.
Touch the Temperature sensor control
repeatedly until the segment for the
required temperature lights up in the
temperature display.
Touch the Duration sensor control re-
peatedly until the required number of
hours for the operating time lights up.
Close the drawer.
Advertisement
Table of Contents
