Table of Contents
Advertisement
Before first use
Connecting via the app
The Miele@mobile app can be used to
connect to your network.
Install the Miele@mobile app on your
mobile device.
To log in you will need:
1. your WiFi network password
2. your drawer password
Typ: ESW
XXXX
Fabr.- Nr. : 00 /
M.- Nr. : XX XXX XXX
The password for your drawer consists
of the last nine digits of the serial num-
ber. This can be found on the appli-
ance's data plate.
Data plate
The data plate is located here:
Start signing the appliance on in the
app. Follow the signing in instruc-
tions.
18
Made in Germany
XX XXX
/
XXX XXXXXXXX
X /
XXX
If requested to activate the WiFi on the
drawer, proceed as follows:
Turn the drawer off.
Press and hold the Duration sensor
control.
At the same time, touch the Re-
mote sensor control.
2 h will light up constantly, 3 h will flash
on and off.
The drawer will be ready for connection
in the next 10 minutes.
Follow the instructions in the app.
When successfully connected, 2 h and
3 h will light up constantly.
Quit the connection mode on the
drawer by touching the Tempera-
ture sensor control.
The drawer can now be operated via
the app.
Advertisement
Table of Contents
