Miele ESW 7010 AM Operating And Installation Instructions page 19

Gourmet drawer
Hide thumbs Also See for ESW 7010 AM:
Table of Contents

Advertisement

Connecting via WPS
Your WiFi router must support WPS
(WiFi Protected Setup).
 Turn the drawer off.
 Press and hold the Duration sensor
control.
 At the same time, touch the Re-
mote sensor control.
2 h will light up constantly, 3 h will flash
on and off.
The WPS connection must be started
on the drawer at the same time as on
the WiFi router.
 Touch the Duration sensor control on
the drawer after a few seconds.
After a short while, 2 h will light up con-
stantly, and 3 h and 4 h will flash on
and off.
The drawer will be ready for connection
in the next 10 minutes.
 Start the WiFi connection on your
WiFi router.
When successfully connected, 2 h and
3 h will light up constantly.
 Quit the connection mode on the
drawer by touching the Tempera-
ture sensor control.
The drawer can now be operated via
the app.
If the connection fails, you have proba-
bly not activated WPS on your router
quickly enough. Repeat the steps
above.
Tip: If your WiFi router does not support
WPS, please connect via the
Miele@mobile app.
Signing out of WiFi (resetting factory
defaults)
To set up a new WiFi connection, the
existing WiFi connection must be dis-
connected.
 Turn the drawer off.
 Press and hold the Temperature sen-
sor control.
 At the same time, touch the Re-
mote sensor control.
With an existing WiFi connection, 2 h
and 3 h will light up constantly.
The drawer will be ready for disconnec-
tion in the next 10 minutes.
 Touch the Temperature sensor con-
trol.
2 h will light up constantly, 3 h will flash
on and off.
After a few seconds, 2 h and 3 h will
start flashing on and off. The connec-
tion has now been disconnected.
 Quit the signing off mode on the
drawer by touching the Duration sen-
sor control.
The WiFi connection has now been dis-
connected. A new connection can now
be set up.
Log off the WiFi if you are disposing of
your drawer, selling it, or putting a used
drawer into operation. This is the only
way to ensure that all personal data has
been removed and the previous owner
will no longer be able to access the
drawer.
Before first use
19

Advertisement

Table of Contents
loading

Table of Contents