Foster BIT25 Service Manual page 5

English
Set point: Display and modification
> Press button and hold to display the set point.
> By keeping button
SPL and the maximum SPH limit)
> When button is released, the new value is stored.
Standby
Pressing the button for 3 seconds, will allow the controller to be put on a standby or output control to be
resumed (with SB = YES only). When on Standby
Keypad Unlock
Press & release then use
seconds or briefly press
Defrost
Automatic Defrost
The cabinet will defrost automatically on a predefined schedule. This setting will also automatically terminate on a
predefined schedule.
Manual Defrost. (Freezer Sections only)
To initiate a manual defrost press and hold the defrost button
Controller Connection Drawing and Dimensions
(Dimensions in mm)
4
pressed, use button or
to select 'LOC'. Press and hold
to resume.
to set the desired value (adjustment is within the minimum
will be displayed.
to change from 'YES' to 'NO'. Leave for 10
for 2 seconds