Arc Rays Can Burn Eyes And Skin; Noise Can Damage Hearing; Work Environment Safety - Weldclass Weldforce 202T Operating Instructions Manual

oil, trash, and other debris. Do not use equipment in areas near flammable chemicals,
dust, and vapours. Do not use this product in a damp or wet location.
1. Stay alert, watch what you are doing and use common sense when operating equipment. Do
not use a tool while you are tired or under the influence of drugs, alcohol or medication. A
moment of distraction when operating equipment may result in serious personal injury.
2. Do not overreach. Keep proper footing and balance at all times. This enables better control of
the power tool in unexpected situations.

14.4.2 Arc Rays can Burn Eyes and Skin

CAUTION! Arc rays from the welding process produce intense heat and strong
1. Use a Welding Helmet or Welding Face Shield fitted with a proper shade filter (refer AS 60974-1,
AS/NZS 1337.1 and AS/NZS 1338.1 Safety Standards) to protect your face and eyes when welding
or watching. (See Filter Table on Page17).
2. Wear approved safety glasses. Side shields are recommended.
3. Use protective screens or barriers to protect others from flash and glare; warn others not to
watch the arc.
4. Wear protective clothing made from durable, flame-resistant material (wool and leather) and
foot safety protection.
5. Never wear contact lenses while welding.

14.4.3 Noise Can Damage Hearing

CAUTION! Noise from some processes can damage hearing. Use AS/NZS
compliant ear plugs or ear muffs if the noise level is high.

14.4.4 Work Environment Safety

DANGER! Remove any combustible material from the work area.
1. When possible, move the work to a location well away from combustible materials. If relocation
is not possible, protect the combustibles with a cover made of fire resistant material.
ultraviolet rays that can burn eyes and skin.
© Weldclass 2020 | E.&O.E.
Weldforce 202
T AC/DC
57