Setting The Temperature; Filling With Water - Hyundai SI 252 Instruction Manual

Instructions for Use
The product has many functions such as
temperature regulating, spraying, dry iro-
ning, variable steam, bursting steam, etc.
When using the iron for the first time, you
may notice a slight emission of smoke
and hear some sounds made by the
expanding plastics. This is quite normal
and it stops after a short time. We also
recommend passing the iron over an
ordinary cloth before using it for the first
time.

SETTING THE TEMPERATURE

First sort items to be ironed, according
to the International Textile Care Labeling
Code.
Use
• Stand the iron on its heel and turn the
temperature dial to minimum. Plug the
cord into an electrical outlet.
• Select the temperature setting required
by rotating the temperature dial so that
the desired setting is aligned with the
heating indicator P12
• The control light will glow showing that
the iron is heating up. When it goes
out, the iron has reached the selected
temperature and is ready for use. The
light will glow and go out as the ther-
mostat maintains the selected tempe-
rature.
IMPORTANT:
The steam iron incorporate a thermal safety fuse to protect the steam iron from over-heating.
However, the iron should not be left unattended while it is connected to an electrical outlet. Spe-
cial care should always be taken when there are children in the home.

FILLING WITH WATER

• First ensure that the iron is disconnected from the electricity supply before fillingwithwater.
• Set the Steam Selector to position „0".
• Open the water fillingin letcover, hold the iron on an angle 45°. Slowly pour the water into the
reservoir using the special filling beaker and taking care not to go over the maximum level
(about 260ml) indicated by "MAX" on the reservoir.
• Push firmly to close the water filling inlet cover.
• During the ironing process, always ensure there is sufficient water in the water tank.
Fig.1
ENG - 28