If The Oven Is To Switch On And Off Automatically; Rapid Heating; Setting The Clock; Setting The Timer - Bosch HCE7443 3R Series Instruction Manual

If the oven is to switch on and off
automatically
Please remember that easily spoiled foods must not be allowed
to remain in the cooking compartment for too long.
Example in the picture: Setting for
190 °C. It is 10:45 . The meal takes 45 minutes to cook and
should be ready at 12:45 .
The function selector is used to set the type of heating.
1.
The temperature selector is used to set the temperature or
2.
grill setting.
Press the 0 Clock button.
3.
Use the or button to set the cooking time.
@ A
4.
Press the Clock button repeatedly until the
0
5.
flashes.
You can see in the display when the meal will be ready.

Setting the clock

When the appliance is connected for the first time or after a
power cut, the symbol and three zeros flash in the display.
0
Set the clock. The function selector must be switched off.

Setting the timer

You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has a special signal. This means that you
can tell whether the timer duration or the cooking time has
elapsed. You can also set the timer if the childproof lock is
active.
14
% Top/bottom heating at
End symbol
y
Use the button to set a later end time.
@
6.
The setting is adopted after a few seconds.
The end time is shown in the display until the oven starts.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.

Rapid heating

With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
Set the function selector to
1.
Turn the temperature selector to set the desired temperature.
2.
The p symbol lights up in the display. The oven begins to heat
up.
The rapid heating process is complete.
The p symbol goes out in the display. Place your dish in the
oven and select the desired type of heating.
Setting procedure
Press the 0 Clock button.
1.
12.00 appears in the display and the
Use the + or - button to change the clock.
2.
After a few seconds, the time is saved. The
out.
Changing from summer to winter time, for example
Press the Clock button twice and change the time using the
0
+ or - button.
Setting procedure
Press the Timer button.
S
1.
The symbol flashes.
S
Use the - or + button to change the timer duration.
2.
Default value for + button = 10 minutes
Default value for - button = 5 minutes
The timer starts after a few seconds. The
the display. You will see the time counting down.
button
0
.
I
0 symbol flashes.
symbol goes
0
S symbol lights up in