Table of Contents
Advertisement
Setting the oven
There are various ways in which you can set your oven. Here
we will explain how you can select the desired type of heating
and temperature or grill setting.
Type of heating and temperature
Example in the picture: 190 °C,
Use the function selector to select the required type of
1.
heating.
Use the temperature selector to set the temperature or grill
2.
setting.
The oven heats up.
Switching off the oven
Turn the function selector to the off position.
Care and cleaning
With attentive care and cleaning, your hob and oven will retain
its looks and remain in good working order for a long time. We
will explain here how you should care for and clean them
correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect operation. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the hob do not use
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or stain
■
remover,
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
12
Top/bottom heating.
%
Changing the settings
The type of heating and temperature or grill setting can be
changed at any time using their respective selectors.
Rapid heating
With rapid heating, your oven reaches the temperature selected
particularly quickly.
Use rapid heating when temperatures above 100 °C are
selected.
To ensure an even cooking result, do not place your dish in the
cooking compartment until rapid heating is complete.
Set the function selector to
1.
Use the temperature selector to set the temperature.
2.
The oven will start heating after a few seconds. The indicator
light above the temperature selector lights up.
The rapid heating process is complete
The indicator light above the temperature selector goes out.
Place your dish in the oven and select the desired type of
heating.
Cancelling rapid heating
Turn the function selector to the off position. The oven switches
off.
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.
Area
Cleaning agents
Appliance exterior
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaners or
glass scrapers.
Stainless steel
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Remove flecks of limescale,
grease, starch and albumin (e.g. egg
white) immediately. Corrosion can form
under such residues.
Special stainless steel cleaning products
suitable for hot surfaces are available
from our after-sales service or from spe-
cialist retailers. Apply a very thin layer of
the cleaning product with a soft cloth.
Hob
Care: protective/care product for glass
ceramic
Cleaning: cleaning agents that are suita-
ble for glass ceramic.
Follow the cleaning instructions on the
packaging.
:
Glass scraper for heavy soiling:
Remove the protective cover and only
clean using the blade. Caution, the blade
is very sharp. Risk of injury.
Cover the blade again after cleaning.
Replace damaged blades immediately.
.
I
Advertisement
Table of Contents
