Table of Contents
Advertisement
B. Configuring Manual Fiery Settings
The Server name and Date & Time settings need to be manually configured. Follow the
steps below to configure these settings:
1. Log in to the Fiery using Command Workstation then click [Server] [Configure] x2
2. Select [Server Name] then enter the server name using the FXO approved naming
convention as shown then click [Save].
FXO Setting
Fiery Server
Server name contains 15 characters including dashes
Server Name
Format :
<Two Digit State Code><Four Digit Center # >-
<C0><Model>-<1>
Example : "TX1234-C0C750-1"
Important: The naming convention described here is specified by FedEx Office
Asset Management. If you are asked to name the controller anything other what is
specified here, please decline the request and report it to your management team.
imagePRESS C750 with imagePRESS Server G100 Configuration and Installation Guide
Remark
Explanation : The example
shows a center in 'Texas' with a
center number of '1234' an
engine model C750 and the
first device of it's model in the
center '1'
32
Advertisement
Table of Contents
