Table of Contents
Advertisement
Deploying the Virtual Kitting Tool Package
FedEx Office certified firmware for the imagePRESS C750 engine is version
and the imagePRESS Server G100 firmware is version 1.21.
Canon USA has produced a Firmware and Device Settings package with the
Virtual Kitting tool. The package automatically installs imagePRESS C750
firmware version
42.01
1. Download the file [FXO_C750_VKT_Package_09162019.zip] from the FedEx Office
Major Account section of Canon U.S.A.'s e-Support website.
2. Unzip the contents to the root of a USB drive. Make sure that the [aca] and
[quickInstall] files are in the top-level directory of the drive. Please ensure the drive
contains no other engine firmware. This USB drive can be re-used for other
imagePRESS C750 FXO Deployments without having to reload the drive.
3. Once fully powered up, press [Settings/Registration] [Log In] Enter System
Manger ID and password.
4. Plug-in the USB drive prepared in step 2 into the engine.
5. Press [Show All], and then press the [Auto Configuration Agent] Icon.
6. Press [Next] then [Start]. The device firmware settings are applied. Once complete,
the device restarts.
imagePRESS C750 with imagePRESS Server G100 Configuration and Installation Guide
and automatically assigns some device settings.
Installation of the Firmware and Settings
takes approximately 20 minutes. If
Firmware v42.01 is already installed it
will be skipped automatically and
loading of the settings will take
approximately 5 minutes.
42.01
13
Advertisement
Table of Contents
