Advertisement
Quick Links
PD-MV1017A Microwave Sensor Instruction
Summary
This is a hi-precision digital microwave sensor whose detection range is 360°and working frequency is
5.8GHz. It is based on Doppler principle which integrates the emitting and receiving. It adopts MCU (Micro
Control Unit) that greatly increases its precision and decreases its fault rate. It's delicate in appearance and
compact in structure. It can be independently connected to the loads or easily installed inside the lightings with
lampshade made of glass or plastic. It is widely applied in the passageway, washroom, elevator, household or
other public areas for security protection or energy saving. It applies for several technical patents and is the
perfect choice for your intelligent living.
EN 61058-1:2002+A2:2008
EN 50317:2002
EN 301 489-1 V1.8.1(2008-04)
EN 301 489-3 V1.4.1(2002-08)
EN 300 440-1 V1.5.1(2009-03)
EN 300 440-2 V1.3.1(2009-03)
Features
1.Non-radiation harm: its transmitter power is lower than 0.3mW, which does no harm to human body.
2.Reliable & Stable performance: it applies the RC filtering and digital filtering in digital processing. It also
uses the digital zero trigger technology, that is, at zero point it will be auto-connected or auto-disconnected. It
uses the Tyco high-power relay to control output, which ensures its reliable performance. It adopts power
management chip to guarantee its stable performance in 100-240V/AC.
3.Remote setting: it is designed with the remote function, that is, you can preset its function by potentiometer
or remote controller to your practical need.
Specifications
Power source: 100-240V/AC
Power frequency: 50/60Hz
Transmission power: <0.3mW
Rated load:
2400W/10A,Max,tungsten(cosφ=1)(220-240V/AC)
600W/5A,Max,fluorescent(cosφ=0.5)(220-240V/AC)
1200W/10A,Max,tungsten(cosφ=1)(100-130V/AC)
300W/5A,Max,fluorescent(cosφ=0.5)(100-130V/AC)
Working temperature: -15°C~+70°C
58.5mm
17.7mm
50mm
Protection level: IP20,Class II
Installation sit: indoors, ceiling mounting
HF system: 5.8GHz CW electric wave,ISM band
Detection angle: 360°
Detection range: 1-11m (radii.) (adjustable)
Time setting: 8sec-12min, (adjustable)
Light-control: 10-1000LUX, (adjustable)
Power consumption: approx.0.5W
50mm
44mm
36mm
36mm 50mm
Advertisement
Related Manuals for pdlux PD-MV1017A
Summary of Contents for pdlux PD-MV1017A
- Page 1 PD-MV1017A Microwave Sensor Instruction 50mm 44mm 36mm 58.5mm 36mm 50mm 17.7mm 50mm Summary This is a hi-precision digital microwave sensor whose detection range is 360°and working frequency is 5.8GHz. It is based on Doppler principle which integrates the emitting and receiving. It adopts MCU (Micro Control Unit) that greatly increases its precision and decreases its fault rate.
-
Page 2: Sensor Information
Sensor information 360º Max:11m Min:1m Min:1m Max:11m Height of installation2.5-4.5m Sensing distance adjustment range Sensing angle adjustment range Applications Microwave can penetrate the glass, plastic and wood, thus the microwave sensor can be installed inside the shade made of certain thickness of glass, plastic or wood. For example, the application in lightings, only if making connection as below shown can you change the common lightings into auto-sensing lightings. -
Page 3: Time Setting
Setting manner one:potentiometer It may take times to adjust values before they satisfy your need. SENS TIME (1)Detection range setting(sensitivity) Detection range is the term used to escribe the radii of the roughly circle casting on the ground when installed at the height of 2.5 m. To turn the knob fully anti-clockwise is the minimum range, fully clockwise is the maximum. - Page 4 (3)Light-control setting It can be defined in the range of 10~1000 LUX. To turn the knob fully anti-clockwise is about 10 lux,fully clockwise is about 1000 lux.When adjusting the detection zone and performing the walk test in daylight,you should turn the knob fully clockwise. 10-1000LUX Note: please don’t adjust the three functional knobs to excess.
- Page 5 Warning! ● Please confirm with prefessional installation. ● For safety purposes, please cut off power before installation and removal operations. ● Any losses caused by improper operation,the manufacturer does not undertake any responsibility. We are committed to promoting the product quality and reliability, however, all the electronic components have certain probabilities to become ineffective, which will cause some troubles.When designing, we have paid attention to redundant designs and adopted safety quota to avoid any troubles.