Advertisement
Quick Links
PD-MV1019 Microwave Sensor Instruction
Summary
This is a hi-precision digital microwave sensor whose detection range is 360°and working frequency is
5.8GHz. It is based on Doppler principle which integrates the emitting and receiving. It adopts MCU (Micro
Control Unit) that greatly increases its precision and decreases its fault rate. It's delicate in appearance and
compact in structure. It can be independently connected to the loads or easily installed inside the lightings with
lampshade made of glass or plastic. It is widely applied in the passageway, washroom, elevator, household or
other public areas for security protection or energy saving. It applies for several technical patents and is the
perfect choice for your intelligent living.
Features
1.Non-radiation harm: its transmitter power is lower than 0.3mW, which does no harm to human body.
2.Reliable & Stable performance: it applies the RC filtering and digital filtering in digital processing. It also
uses the digital zero trigger technology, that is, at zero point it will be auto-connected or auto-disconnected.It
adopts power management chip to guarantee its stable performance in rated voltage.
3.Remote setting: it is designed with the remote function, that is, you can preset its function by potentiometer
or remote controller to your practical need.You can easily set and select the function within 12 meters.
Specifications
Power source: 100-240V/AC
220-240V/AC
Power frequency: 50/60Hz
Transmission power: <0.3mW
Rated load:
500W/5A,Max,tungsten(cosφ=1)(220-240V/AC)
200W/2.5A,Max,fluorescent(cosφ=0.5)(220-240V/AC)
500W/5A,Max,tungsten(cosφ=1)(100-130V/AC)
200W/2.5A,Max,fluorescent(cosφ=0.5)(100-130V/AC)
Working temperature: -15°C~+70°C
Protection level: IP20,Class II
Sensor information
Ceiling installation
L
14
13
12
11
10
9
8
Detection range: 11m max (Height of installation2.5m)
Detection range: 10m max (Height of installation6m)
Detection range: 10m max (Height of installation10m)
７０ｍｍ
H
12
11
10
9
8
7
6
5
4
3
2
1
7
6
5
4
3
2
1
0
1
2
3
4
5
6
Ground
Detection range: 11m max (Height of installation4m)
Detection range: 10m max (Height of installation8m)
Installation sit: indoors, ceiling mounting
HF system: 5.8GHz CW electric wave,ISM band
Power consumption: approx.0.5W(100-240V/AC)
Detection angle: 360°(Ceiling installation),
Detection range:
2-10m (radii.) (adjustable),(Ceiling installation)
25m Max. (adjustable),(Wall installation)
Light-control: 10-1000LUX, (adjustable)
Time setting: 10sec-20min, (adjustable)
L
7
8
9
10
11
12
13
14
６４ｍｍ
180°(Wall installation)
360º
Sensing angle adjustment range
Advertisement
Related Manuals for pdlux PD-MV1019
Summary of Contents for pdlux PD-MV1019
- Page 1 PD-MV1019 Microwave Sensor Instruction ７０ｍｍ ６４ｍｍ Summary This is a hi-precision digital microwave sensor whose detection range is 360°and working frequency is 5.8GHz. It is based on Doppler principle which integrates the emitting and receiving. It adopts MCU (Micro Control Unit) that greatly increases its precision and decreases its fault rate. It’s delicate in appearance and compact in structure.
- Page 2 Wall installation 25m Max. 180° Height of installation1.5-2.5m Correct moving orientation Detection angle Applications Microwave can penetrate the glass, plastic and wood, thus the microwave sensor can be installed inside the shade made of certain thickness of glass, plastic or wood. For example, the application in lightings, only if making connection as below shown can you change the common lightings into auto-sensing lightings.
- Page 3 (1)Detection range setting(sensitivity) Detection range is the term used to escribe the radii of the roughly circle casting on the ground when installed at the height of 2.5 m. To turn the knob fully anti-clockwise is the minimum range, fully clockwise is the maximum. 2-10m Note: the above detection range is gained in the case of a person who is between 1.6m~1.7m tall with middle figure and moves at a speed of 1.0~1.5m/sec.
- Page 4 Setting manner two:Remote control ON: press ON, the load connected will keep working for 6 hours and then automatically turn to AUTO mode. ① OFF: press OFF, the load connected will be off for 6 hours and then automatically turn to AUTO mode. AUTO: press AUTO, sensor enters the auto-detecting mode, SENS that is, when signal detected and the ambient light intensity is...